big block 402 engine brackets
 

Just bought a 402 for my 69 truck don't remember mounting bracket location and engine came with some of them this one has alternator on passenger side i dont think thats right maybe it is
need photos or help so i know what to buy thanks

Re: big block 402 engine brackets
 

The truck pulleys and mounting brackets are the same as the 65-68 big block Chevelles if you are looking for a source for replacements.

But you are correct, passenger side alternator setup was for the long water pump that was never installed on 68-72 big block trucks. Sounds like somebody swapped a big block into your truck from a 73 and up truck donor or 69 and up car donor.

Re: big block 402 engine brackets
 

need pictures of ac brackets have the other figured out

Re: big block 402 engine brackets
 

Google images for 68 Chevelle ac brackets should find it.

Re: big block 402 engine brackets
 

this is a pic taken from another member...they are the stock 72 ac brackets

Re: big block 402 engine brackets
 

and the ps and alt brackets

Re: big block 402 engine brackets
 

Thanks that was helpful

Re: big block 402 engine brackets
 

one more

Re: big block 402 engine brackets
 

ps brackets

Re: big block 402 engine brackets
 

the ac brackets were those original bracket

Re: big block 402 engine brackets
 

yes

Re: big block 402 engine brackets
 

correct its a car engine that was sold as a truck engine price wasn't bad so i can't complain

Re: big block 402 engine brackets
 

where does the ps tank mount thanks

Re: big block 402 engine brackets
 

It’s mounted to the driver side fender.

Re: big block 402 engine brackets
 

Those are mine which would make them '70 but I imagine all the same!

Re: big block 402 engine brackets
 

From a dry run I did. Shows all the brackets. It doesn't show the retainers/clamps near the evap. I have assembly instructions if you need it, down to the bolt type.

Re: big block 402 engine brackets
 

need a photo of it thanks

Re: big block 402 engine brackets
 

Found a thread using search box at top of page with check box for this site selected. There are some included that had a bracket from radiator support, but the big block trucks I have owned (70 and 71)have had it like on fender.

http://67-72chevytrucks.com/vboard/s...d.php?t=735249

http://67-72chevytrucks.com/vboard/a...1&d=1491940429