1966 k10 panel vin# decode help please
 

looking at this truck. its made in Canada and i need help with the Vin break down

6K1405823984A
FT034736-PAINT 5006
thanks for your help
johnny

Re: 1966 k10 panel vin# decode help please
 

I believe you are missing a digit, should be a 9 after the K.

http://www.oeltd.net/doc/6066gmc/VINs/gmc-canada.htm

http://67-72chevytrucks.com/vboard/s...d.php?t=463671

Re: 1966 k10 panel vin# decode help please
 

nope

Re: 1966 k10 panel vin# decode help please
 

The first link I posted has GMC Canada decoding. They all show a 9 after the K. Not sure where they are getting their info from

Re: 1966 k10 panel vin# decode help please
 

Only on GMC trucks is the 9 used in Canada it is also used behind the "C". Denotes all Canadian built GMC's. Chevrolet is also built by GM but doesn't use a 9 along with Caddy, Buick and Pontiac etc.
ron

Re: 1966 k10 panel vin# decode help please
 

66 chev 115" WB 4 X 4 Panel with 8 cyls .production #23984 and the "A" stands for GVW capacity. I would doubt that were were any more than 30-40 4 x4 panels built in any production year in Canada
ron

Re: 1966 k10 panel vin# decode help please
 

thanks RON
what about the bottom line numbers? paint code anyone?
thats not many trucks built seems low but i dont know
thanks again for all replys

Re: 1966 k10 panel vin# decode help please
 

that plate that you are looking at is a body ID plate.. your vin plate is in the drivers door jamb
http://imagizer.imageshack.us/v2/160...924/6cRIvl.jpg
production of 4 x 4 panels in the US never exceeded 200 in any given year and in 1966 their population was 10 times greater tha ours. just taking the percentages. mine is a 64 GMC 4 x 4 panel and I doubt that there were 25 built, never seen many around
ron