Re: My 52 GMC Build
 

I like this shot
Attachment 1355105

Re: My 52 GMC Build
 

Made a switch box for the air ride out of stainless steel.
Attachment 1355996
Also got the front clip body mounts made. I'm putting one on each side. Inside the fender.
Attachment 1355997

Re: My 52 GMC Build
 

I'm soon going to start making my box. I have the front, a tailgate and the fenders, just making box sides and stake pockets. Can any of you guys give me the dimensions of the box sides. I know the box is 78" long and 50" wide. I need to know how tall the vertical sides are, how long the 45 degree angled part is, what the tube diameter is and top of fender to tube. Also dimensions of stake pockets
Thanks a bunch
Attachment 1356748

Re: My 52 GMC Build
 

The bed height you should be able to find in here: GM Heritage Centre information pack

If you just want the heritage centre page, here it is.

The rest I'll let someone with the right year answer. My 46 has a different bed.

Re: My 52 GMC Build
 

Thanks so much 05snopro440. I found a few dimensions gets me closer.

Re: My 52 GMC Build
 

Cool Build!

Re: My 52 GMC Build
 

Got my battery box's made. The battery's are 7.5"X 12"X 7.5" and are 50lb each. The outside of the box's are 50", so I can bolt the box side's right to them and gives me 1/2" extra for battery's. The sheet metal is to protect from tire projectiles and is 1/8" thick.
Attachment 1359314
Attachment 1359315
Attachment 1359316

Re: My 52 GMC Build
 

Well, we know those battery trays won't fall off. ;)

They look very robust, nice work!

Re: My 52 GMC Build
 

Nice work for sure! You'll want a stout battery box in case of a tire blow out. Keep up the great work!

Re: My 52 GMC Build
 

Go big or go home right.
Thanks guys. The whole truck is coming along just the way I wanted.
I pick up my air tanks, compressors and valves tomorrow. :bann:

Re: My 52 GMC Build
 

nice build
did you get the box side measurements you needed
if not let me know I have my 49 box in my garage
I can get what you need
jim

Re: My 52 GMC Build
 

Thanks Jim I did get what I needed. When I picked up my air compressors from "air assisted" today, they are working on a 1950 chev so I just measured it. :)

Re: My 52 GMC Build
 

What's your eta on the truck? You've got to be getting excited? :lol:

Re: My 52 GMC Build
 

ETA: From my original goal, I have a year and a half left to get it done. Everything is coming together much faster than I originally thought, but still lots to do. Yes so excited !!!!!

Re: My 52 GMC Build
 

Well I went to get my air goodies friday. They look so cool now I just have to mount them. They are Viair 480c compressors, 24" spun aluminum tanks (4gal) and Accuair VU4 valve
Attachment 1361362

Re: My 52 GMC Build
 

Got tanks, compressors, and valves mounted. Just a bit more pluming and some wiring and then test.
Attachment 1362475

Re: My 52 GMC Build
 

Got it all wired up today, then tested. Just one leek. The compressors are quite quiet up to 200psi, with 150psi in the front bags it lifts the truck 5.5" that should work. I can lift it up to that height without the compressors turning on too. Got all the wires and hoses close to where they will end up once I have the frame finished. The gauges will end up on the transmission hump in front of the shifter, once I have it built.
Attachment 1362830
Attachment 1362831

Re: My 52 GMC Build
 

Thought I would post the box side measurements I got, hope it will help someone.
Attachment 1365192

Re: My 52 GMC Build
 

It looks really nice! Are those viair 280's?

Re: My 52 GMC Build
 

Thanks Dieselwrencher!! No they are Viair 480's 200psi

Re: My 52 GMC Build
 

Dang, that's sweet. I didn't see the post where you got them the other day for whatever reason. They definitely should be quick.

Re: My 52 GMC Build
 

Ya they are fast. Takes just over 1 min to fill my 8 gal from 165psi to 200 psi

Re: My 52 GMC Build
 

Badass!!!!

Re: My 52 GMC Build
 

Looks great

Re: My 52 GMC Build
 

Been a while had to do some house and daily driver repairs.
Got my box sides bent up. Started trimming for wheel clearance.
Chopped 3" off the bottom of the fender to get it to the height I'm going with.
It's all just clamped now I had to see what it would look like.
The rear is being bolted to my battery boxes and brackets off the frame for the front.
Attachment 1373569
Attachment 1373570
Attachment 1373571
Attachment 1373572