Help with rear axle code
Rear axle code on right passenger side says RHA W330 1; what is the rear axle ratio for this code???
|
Re: Help with rear axle code
that is a 1972 3:07 ratio..
Here is a link.. srcoll down to axle codes and click on year http://www.americanclassic.com/paint.htm?p1=axles |
Re: Help with rear axle code
I need this info but the link is dead now....arrrgh!!!!!
|
Re: Help with rear axle code
a code that was stamped 40years ago is not always what is inside now alot of times// a simple rear fluid change will give you a foolproof answer
|
Re: Help with rear axle code
True enough, I am pretty sure this is an unmolested truck though, as far as the rear axle. I plan to pull the cover soon and change gear oil but I have a lot to get done before I get around to it. I really would like to find a ratio code chart.
|
Re: Help with rear axle code
Yes that site is dead, I now have an interchange manual that lists the codes, post up your axle code and I can tell you what it originally was
|
Re: Help with rear axle code
Its a 70 pickup TDA. I found another post after I did a search that said it is a 3.73. Im guessing its an open (peg leg)
|
Re: Help with rear axle code
You are both correct, the GM parts manual says that is a 1072 3.07 (open) for CS/CE, and the same stamp was used in 1970 for a 3.73 (open). Therefore, if it is a 6-lug, it's probably the 3.73 and if it is a 5-lug it's probably a 3.07.
Good Luck!! |
Re: Help with rear axle code
It is a 6 lug, 3.73 should be nice with my overdrive. Thank you!
Posted via Mobile Device |
Re: Help with rear axle code
My Hollander interchange manual lists it as a 70 3:73 open.
|
Re: Help with rear axle code
any help with a 72 rearend stamped RHC W126 1 Thanks in advance...
http://i163.photobucket.com/albums/t...r/IMAG0708.jpg |
Re: Help with rear axle code
[QUOTE= a simple rear fluid change will give you a foolproof answer[/QUOTE]
Please explain, what would one look for? |
Re: Help with rear axle code
Book says 1972 3.73 open (non-posi).
|
Re: Help with rear axle code
1 Attachment(s)
Here is what was stamped on mine...
It's a 3:07 Posi now ;) |
Re: Help with rear axle code
Great thanks...just wanted an idea before I popped to take a look...
Quote:
|
Re: Help with rear axle code
Need a bit of help, have a 1970 C-10 that I have reason to believe was swapped to a 71 Frame, dash sheet says automatic & had to cut a bellhousing crossmember out that was riveted in, disc brakes, and rear lug studs for a 70 didn't fit but 71's did, as well as a 71 type grill, & am noticing looseness in the rear end, anyway it is 5 lug with coils and the number on pumpkin is 3896838 and code on tube is RHA W143 1
|
Re: Help with rear axle code
Bump. I have a 72 with rha code. Hoping someone has a definitive source.
Posted via Mobile Device |
Re: Help with rear axle code
RHA= 1972, 3:07 ratio (Source: Hollander interchange manual)
|
Re: Help with rear axle code
Quote:
Posted via Mobile Device |
Re: Help with rear axle code
RHA, '72 CS/CE10 3.07:1 Chevrolet Parts Manual
|
Re: Help with rear axle code
How about this one?
RA 0208 W2 |
Re: Help with rear axle code
Both 68 and 69 used RA for the 3.07 open for a Series 10.
|
Re: Help with rear axle code
Quote:
For example, mine is stamped 11:41. 41 divided by 11 equals 3.7272, so it's a 3.71:1 gear ration |
Re: Help with rear axle code
Quote:
|
Re: Help with rear axle code
Gmpartswiki.com will answer all your decoding questions.
Posted via Mobile Device |
All times are GMT -4. The time now is 04:03 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com