59 panel truck ? on alot of stuff
59 3/4 ton with w 9600GVW weight rating pacific body on it. straight frame naturally
manualy steering is shot... box manly.. planing on going to power steering... i saw borthers swap/upgrade and read what they did. any one got some pointers? or did brother cover majority of it? brakes the previos owner re-did 3 out of 4 wheel cylinders and new master cylinder. it has what looks like a bastardized vacuum boost over hyd setup on the the pass side. it does lock up all 4 wheel on med- heavy pedal pressure... i want to convert to dual chamber MC for saftey reasons and convert to hydroboost so i can keep my manual tranny..... it also has an eaton rear end... are there any code on the housing to dipic gears and dif setup? i also heard the gm 14bolt brake hubs, carrier and axle shaft will fit inside? i would like to put soem dually drums on the back.. (13x3" brake shoes vs the 13x2" shoes. leave springs... were can i get new eye bushings? thanks adam |
Re: 59 panel truck ? on alot of stuff
did i ask some off the wall question?
|
Re: 59 panel truck ? on alot of stuff
no! check with the filling station or your local leaf spring builder.
|
Re: 59 panel truck ? on alot of stuff
Let's see some pictures!!
|
Re: 59 panel truck ? on alot of stuff
Quote:
pic im working it... laptop got stolen 3 weeks ago so things are slow :( |
Re: 59 panel truck ? on alot of stuff
1 Attachment(s)
here you go with a picture
vin is 3G 59 O 119361 trim STD paint 718A GVW 9600 the LMC catollog only goes to 3E for 3600 is 38 a 1 1/4 ton? |
Re: 59 panel truck ? on alot of stuff
forgot to mention it got 17.5" rims up front and 16" split rims out back
|
Re: 59 panel truck ? on alot of stuff
Quote:
BTW, what are the rest of your plans for the panel before we give you anymore suggestions? It may help us answer you better. Again we love pics! hint-hint, nudge-nudge! |
Re: 59 panel truck ? on alot of stuff
Quote:
when money promits ZF650 6 speed tranny thing already on the to do list electric wiper conversion dual master cyl conversion with update hydroboost at a later date power steering... gut feeling say i have a 1/2 manual steering box get the pass door worrking and long with the driver side door rebuild the frames. update tie rods ends front wheel bearings? dont know if they are ball bearings/ roller bearing or tapered bearings but i can hear them when it was ona lift saturday. 75% of hte grease zerts wont take grease :( the A pillar is ginda gone on the truck pass side the is the biggest rust spots. |
Re: 59 panel truck ? on alot of stuff
5 Attachment(s)
here are some pictures
|
Re: 59 panel truck ? on alot of stuff
5 Attachment(s)
some more
suck only cna load 5 at a time |
Re: 59 panel truck ? on alot of stuff
Thnx for the pics! Looks like a sweet ride for a work truck!
|
All times are GMT -4. The time now is 08:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com