Body mounts
1 Attachment(s)
I got some body mount bolts and bushings but don't have a clue where the different length bushing goes and bolts go. Anyone has the right information I would appreciate. I am building a jig mimicking the frame's body mounts. The tub needs extensive rebuilding, and the manual I bought shows a picture but does not have sizes.
|
Re: Body mounts
1 Attachment(s)
a page from LMC and a post from a couple years ago....67-72chevytrucks.com/vboard/showthread.php?t=362908
|
Re: Body mounts
Unfortunately they do not give the size of the bushing when you click on the part.
|
Re: Body mounts
Well out of the 5 bushings used on either side of the main body the front bushing on either side is the only ones that are not the same thickness as the other 4 positions they use the thickest upper bushings in the front position on either side, the 4 rear upper bushings on either side are all the same thickness, if you have the radiator support bushings also the 2 upper bushings for it are the 2 smaller diameter bushings.
Paul @ GMCPauls |
Re: Body mounts
Thanks for the information, I am building a jig to mimic the 72 frame, I am rebuilding the tub and will be able to roll the tub 360 degrees so I can weld in the flat.
|
All times are GMT -4. The time now is 09:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com