No big surprise on the rot after blasting... few pin holes in the area near the visors and a few in the grille. Little epoxy will fix those right up...
here's the worst I guess, the main support was rotting. I think i'll just plate over it with some steel and call it good. Bit of an accident with the dripping as you can see. The first gun I started using wouldn't adjust right so it friggin poured primer on the firewall... I trashed it and pulled out a newer one that I had... little sanding should fix it, or you could say it's double protected now!
Last pic is the two parts I forgot to cover!
didn't notice them hanging up on the side until I had cleaned up...