|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
OK, first off i want to say this to you, you are doing a great job so far. What you have done so far is the perfect ground coat. You now know where your high spots are and your low spots are. You can not tap down your high spots with your body hammer slightly ( in RED) and add another coat of fiilling over top of the whole thing. the blue is in the green and that green patch is a near perfect featheredge of the filler. now get out to that shop and finish that filler. And i will start to get my work done also. Make sure you do not see any jsharp edges in the filler, this will cause you to have shadows in the paint. I hope you did not take this in a bad way, I just want to help you out. From one truck guy to another, good luck and struggle on, i still do!
|