Thread
:
NP 205 Rebuild and Info
View Single Post
06-14-2011, 11:32 PM
#
2
jbclassix
Junk Yartist
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
Re: NP 205 Rebuild and Info
First I removed my rear output yoke. This is my home-made yoke holding fixture that has come in VERY handy over the years!
With the t-case in 4-hi I also removed the front yoke while holding the rear yoke.
Remove the speedo drive assembly
Remove the rear seal housing
The rear output bearing just slides off. It is "sandwiched between the yoke and speedo gear
Remove the speedo drive gear
Remove the spacer from behind the speedo gear
Remove the rear bearing housing. Be careful removing the housing, the front bearing is a needle type and they will fall out.
__________________
-Jeremy
YOU ONLY FAIL IF YOU STOP TRYING
70 Crew Cab Build Link
70 GMC Suburban 4X4 build thread
95 Yukon Daily Driver
Rebuilding an NP205
jbclassix
View Public Profile
Find More Posts by jbclassix