Thread
:
NP 205 Rebuild and Info
View Single Post
06-14-2011, 11:52 PM
#
3
jbclassix
Junk Yartist
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
Re: NP 205 Rebuild and Info
Next the Rear output shaft can be removed. There are roller bearings inside the output shaft assembly. They have a snap ring to keep them in place, but still use caution not to lose them.
Next I removed the front output seal housing
Next I pulled the front output bearing. There is a spacer/oil slinger behind the bearing.
Next I removed the rear bearing cover for the front output. There are more needle bearings so make sure you have all of them.
Next I pulled the front output shaft assembly. The shift collar and high gear stay in for now.
Next the shift collar and high gear come out. I reassembled the whole front output assembly to keep everything together.
__________________
-Jeremy
YOU ONLY FAIL IF YOU STOP TRYING
70 Crew Cab Build Link
70 GMC Suburban 4X4 build thread
95 Yukon Daily Driver
Rebuilding an NP205
jbclassix
View Public Profile
Find More Posts by jbclassix