Quote:
Originally Posted by 68 TT
1990-1994 C2500 light duty 6-lug rotors.
AutoZone - Duralast part #5596 ~$75
CSK O's - BrakeBest part #56915RGS ~$67
NAPA - Premium part #NB 4886915 ~$80
Best thing is no shipping cost on about 60 pounds of steel to go this route since you can get them locally. If you are lucky you can get a good used set cheap. I picked up the spindles assembled with rotors, calipers, pads & hoses for less than $60 complete in great shape.
|
You still have to swap the lower a-arm for a C20 a-arm, so you will have the correct lower balljoint hole diameter.
Still have to replace the upper and lower balljoints with 88-98 ball joints.
Still have to change the outer tie rod end to a 88-98 version, and use some type of tie rod sleeve to connect to your original inner tie rod.
I just don't see this as a
cheaper alternative.
(just my opinion)
Aftermarket rotors like ECE sells require nothing but a rotor change.