Well I had some pretty good progress today! I am hoping to have good progress for the next few weeks as I am all alone here and can work without any interuptions, normally my dad will find a lot of other work for me to do, but as he is on holidays, I can go full bore on my own stuff!
Skill testing question: Try spot the truck! I tell ya... leave a project for a few years and people start using it as storage area.
![Name: March 1st 2012 002 (Small).JPG
Views: 3403
Size: 101.4 KB](https://67-72chevytrucks.com/vboard/attachment.php?s=3749b774856924d0a604cfbb9b67d80c&attachmentid=882790&d=1330669848)
made some necessary cuts...
![Name: March 1st 2012 004 (Small).JPG
Views: 3409
Size: 104.8 KB](https://67-72chevytrucks.com/vboard/attachment.php?s=3749b774856924d0a604cfbb9b67d80c&attachmentid=882791&d=1330669848)
figured I had all the metal cut, bent up, and bashed out just as I wanted it...
![Name: March 1st 2012 005 (Small).JPG
Views: 3395
Size: 87.9 KB](https://67-72chevytrucks.com/vboard/attachment.php?s=3749b774856924d0a604cfbb9b67d80c&attachmentid=882792&d=1330669848)
now this is the second time this has happend!? I did the same thing on the Drivers side! This time I was watching for it, but still seemed to leave this little triangle, for some reason I can't seem to get the panel to fit in properly when I go to mark it, eventhough I leave extra material, I still come up short?
![Name: March 1st 2012 009 (Small).JPG
Views: 3400
Size: 109.5 KB](https://67-72chevytrucks.com/vboard/attachment.php?s=3749b774856924d0a604cfbb9b67d80c&attachmentid=882793&d=1330669848)
well, what else can I do? getting good practise with welding these little triangle pieces, I did a much better job with this floor pan, it almost makes me want to go back and re-do the drivers side..