[xpickup]

This morning I got up and started on the cab corners. I removed the inners and outers. I also cut, fitted, and welded in the bent 1x1 corners. Then made the inners. I fit and welded in the cab corner on the passenger's side. Then ground the cab corner and the back panel I made up. I started on the drivers side. But I had to make the lower back inner door opening. I made it and welded it in. Then I blanked out the floor panel. I have a couple more tubes to put in. Then I can draw my line to start paneling them on the bead roller. Here are some pictures.

Shannon
Posted via Mobile Device
Posted via Mobile Device