Quote:
Originally Posted by woodsrat
When you say PTO cover is that the cover straight out the rear of the transfer case?
The truck seems to go into 4 low and a neutral but the shifter just don't feel correct but it will move in 4 wheel low.
Upper rod I can move in and out with a bar but I can't get the bottom one to go either way.
Thanks
|
Had to fix my thinking... the upper one (closest to transmission) is the hi-low, the lower one (closest to front drive shaft) is the 2-4
The PTO cover is the 6 bolt rectangular cover on the oposite side of the front output.
another suggestion is to jack up the front and rear end to take any torque off the drive line, then try shifting.