The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**The Rocknrod** · 07-08-2015, 08:46 AM

Hi Ken, Thanks for the help on the other thread. I have 235/75R-15's and had trouble with the HF lift as well, but I got it in there - finally - Working alone.
I used to live in San Diego and sometimes visited the Pomona swap meet. Sure miss that So-Cal scene. Nothing like it on earth.
I have a large HEI distributor but I'm not going to use it I think, probably buy a small one on ebay. I was mostly worried about using finned aluminum valve covers and the clearance there at the firewall on the passenger side of the heads.
Anyway thanks for the help.

07-08-2015, 08:46 AM	#13
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Ken's 1966 C10 Short Fleetside build Hi Ken, Thanks for the help on the other thread. I have 235/75R-15's and had trouble with the HF lift as well, but I got it in there - finally - Working alone. I used to live in San Diego and sometimes visited the Pomona swap meet. Sure miss that So-Cal scene. Nothing like it on earth. I have a large HEI distributor but I'm not going to use it I think, probably buy a small one on ebay. I was mostly worried about using finned aluminum valve covers and the clearance there at the firewall on the passenger side of the heads. Anyway thanks for the help. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?