Quote:
Originally Posted by crakarjax
Ah right I was thinking about the No Limit kit, which has clearance issues if the crossmember is pancaked or set up into the frame iirc.
This one doesn't have that issue since it's located to the frame, but it looks like it hangs as low as the crossmember such that pancaking the x-member or setting it up into the frame wouldn't gain any clearance, but it's hard to tell give n the angles in the pics. Can anyone confirm that?
|
I used No Limit's kit in Sunburn (link is in my sig). I raised the cross member in the frame 1.5". We had NO clearance issues with the rack or tie rod ends clearing the frame rail. We also had air bags in our set up...