Quote:
Originally Posted by reaper71
As I stated before this is what your tube will look like inside....The bolt you see is the way you secure the column,this is where the flange nut is used...So when it's all said and done you have a very solid mount for the column (at the bottom) so now when you need to remove it loosen the bolt and slide the column out of tube..
onto the upper mount..
|
Hey Mark, I went through your build again looking for the lower column mount to share with a friend for his build. Thanks again for the "how to".
In this post, you were showing the column mount as shown below.
Do you happen to have a picture of the brake pedal assembly mounting? I did order the same set up from Speedway and would be real happy to follow your lead for installation. Thanks Mark.