Re: Help me lower my 71 C10
No rear shock relocators are needed if you stay at 4" rear drop or less.
(My opinion) The relocators change the angle of the rear shocks on a 5"-6' rear drop.
You need this.
Otherwise they just pivot on the shock bolts because they are laying too flat.
You can probably do without the adjustable track bar at a 4" rear drop, but you always need to measure and see if the rearend is centered under the truck.
I would always use one.
That's really the only 2 things I would associate with your "other stuff" comment.
You need the rest.
Good quality springs, shocks and drop spindles.
You also need a front sway bar with good bushings if you don't have one.
Best bang for the buck on these trucks.
It's funny, most people that install a set of 3/5 or 3/4 springs always want to go lower.
Here's a picture to help motivate you,...
Last edited by lolife99; 06-11-2019 at 02:10 PM.
|