The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need ideas for an ECC for Boyd Welding tank

notsolo · 11-29-2019, 08:26 PM

Probably not the same as what your working with. On mine 93 5.7 TBI, 3 lines out of the top of the tank, fuel out, return and vent. Vent line runs up the drivers side to the charcoal can which I added in between head light and the Radiator. Other side of the charcoal canister goes in the TBI carb. Also a rollover vent on the tank....Charcoal canister came off a mid 90's truck, along with some of the lines to the carb.....And it is a Boyd side fill.

11-29-2019, 08:26 PM	#3
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,451	Re: Need ideas for an ECC for Boyd Welding tank Probably not the same as what your working with. On mine 93 5.7 TBI, 3 lines out of the top of the tank, fuel out, return and vent. Vent line runs up the drivers side to the charcoal can which I added in between head light and the Radiator. Other side of the charcoal canister goes in the TBI carb. Also a rollover vent on the tank....Charcoal canister came off a mid 90's truck, along with some of the lines to the carb.....And it is a Boyd side fill. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=635605 Last edited by notsolo; 11-29-2019 at 08:33 PM.