The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cory d · 01-19-2013, 05:02 AM

I saw on you JT truck that you placed the panhard pretty far off center of the axle. Does this have an effect turning one dirrection or the other? If so is there a good compromise between lateral location on the axel and rod lenght?

PANHARD BEFORE REAR SWAY BAR
Would you suggest adding a panhard bore a rear sway bar? Sounds like circle folk mount the panhar bar to the left side of the frame so the panhard bar gains a downward angle when cornering. Would this have a noticable effect when not combined with a rear sway bar?

01-19-2013, 05:02 AM	#1541
cory d Registered User Join Date: Dec 2011 Location: Arlington WA Posts: 1,728	Re: Make it handle I saw on you JT truck that you placed the panhard pretty far off center of the axle. Does this have an effect turning one dirrection or the other? If so is there a good compromise between lateral location on the axel and rod lenght? PANHARD BEFORE REAR SWAY BAR Would you suggest adding a panhard bore a rear sway bar? Sounds like circle folk mount the panhar bar to the left side of the frame so the panhard bar gains a downward angle when cornering. Would this have a noticable effect when not combined with a rear sway bar? __________________ GMC C15 355 SM465 3.73 80 C10 cruiser build thread 79 short stepside crew cab. big and ugly. build thread Last edited by cory d; 01-19-2013 at 05:25 AM.