Quote:
Originally Posted by 1964C10
Great build so far! Keep up the good work! On your Blazer tank do the cross sill need to be cut the way you have it setup? I checked the sizes on that tank and the website lists it at 10 3/4" tall with the bottom half 3 1/2" tall this would leave 7 1/4" going up from the bottom of the frame rails where the rails are 4" tall. Long story short I calculate that you need some sort of drop? Thanks for any info!
|
If it's sitting below the top fram rail then you should be fine with the bed cross sills. Unless your filler needs clearance somehow...
Check out tri-pro automotive's build "Project GPW", he used a little filter on the differential vent hose.