The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tjsblazer · 04-10-2015, 10:20 PM

So I decided to use 73+ front spring u-bolt plates so I could add a front sway bar down the road if I wanted. However the axle and housing on the 72 is 2.75 and 3.5" so I had to elongate slightly with an end mill and take 0.125" out of each hole.

[IMG]

[/IMG]

04-10-2015, 10:20 PM	#51
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: tjs 72 Blazer Build So I decided to use 73+ front spring u-bolt plates so I could add a front sway bar down the road if I wanted. However the axle and housing on the 72 is 2.75 and 3.5" so I had to elongate slightly with an end mill and take 0.125" out of each hole. [IMG][/IMG] __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 03-28-2016 at 11:05 PM.