[mcmlxix]

Does anyone know if they make adapters to fit the connections on the fuel pump? This is from an 88 K5 and I would like to come up with something that uses the factory connection at the pump/tank and that I can rig up to the hard line. Need both the feed and return line. I don't want to run braided line. Either EFI rated rubber hose or the modern nylon type.

RockAuto sells another male connector for the feed line but I need the female end....
Fitting Attachment End 1 Male O-ring - M16-1.5
Fitting Attachment End 2 None
Fitting Size End 1 16 mm
Fitting Size End 2 3/8 In.
Fuel Line Connector Design Male O-Ring
Gasket Material Viton
Material Steel
Package Contents Steel Fuel Line Repair Kit - 3/8 In. X 18 In. W/16mm Fitting