[Rokcrln]

Had some time tonight to get the rear cab corner welded in and lined up with the door body line. I am not sure what was off but with the top body line alined the bottom one was about 3/8" to low. The corner was not replaced before but the truck cab could have been just a bit off from the burb door opening so I adjusted things before welding. I also brought the corner profile in line with the door since the door also did not line up that way! Next will be the rear rocker and "B" post bottom repair. I left the edge of the corner that wraps around the jamp un welded for now until the rocker is ready to weld incase I need to tweek things abit.

Kevin
LFD Inc.