Quote:
Originally Posted by Ironhorse
Not sure where or when I got these, have had them for quite sometime tho. Just the two pieces in the pic is all I have.
The threaded round disc has a hole on the back side, looks to be 7/16'' diameter with fine threads. Two 1/8'' square holes on the front directly across from each other. It is metal, non-magnetic, stainless maybe?
The thinner metal tab, also not-magnetic, aluminum perhaps? Has a joggled upper tab and a lower rounded bottom. Hole in center is approx. 1/2'' in dia.
Tried a search and came up with both parts being for a certain style of choke delete but could not pin it down to specific. Would really like others to chime in on what it is for sure and value?
|
I started to answer this earlier this afternoon but got distracted and forgot about it....
That style of choke delete is for the bezels with the choke label in the top right corner of the bezel. I think all of the '67's had a manual choke so it would only be for the '68's with 327 or 396 V-8. My '68 has one like that and it has a 327/TH400 in it. I think they are pretty hard to find. Member Jeff's bowties sold one for $40. So I would say $40-$50.
LockDoc