Re: Old Blue
This weekend, I decided to try and get some dynamat inside the doors and refresh the PW and PDL wiring. It took some mental preparation due to the skin I knew I would leave behind. The sharp edges inside these doors seems like they are meant to keep people away. I taped off the edges and paced myself and it all seemed to work out fine. I purchased some dynamat a while back and had about 4 sheets of 12x36 so I figured lets get'r done.
I removed all wiring, cleaned it, cleaned connectors and re-taped everything. Then cleaned the inside of the doors with royal purple and a drywall sanding block. This seemed to work pretty good and my doors didn't seem too dirty on the inside. Finished up with a rag and some rubbing alcohol.
Dynamat went from just below door handle to about 6 inches from the bottom. The change in sound when closing the door is quite noticeable and it reduced the amount of road noise when driving around without door panels.
I am pretty happy with the results of my Saturday afternoon.
Pics...
|