[mcmlxix]

Installed the custom rear body harness.
Terminated at a junction box so I can tie into the rear trailer harness (blue wire.)
I also have LED lights on all corners and will have my rear side markers flash with the turn signals.
I also ran the harness along the body from the firewall, along the rocker box, then up through the driver side wheel well. I still need to add some clips to secure the harness along the rocker box. It's wrapped in TechFLex F6 split loom.

I used a piece of flex conduit to snake the harness through the rocker box to help protect it from sharp edges and tight turns.

The only thing running inside the frame will be fuel and brake hard lines...