The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**leddzepp** · 05-10-2023, 07:28 PM

Do the spindles have any part numbers on them? The easiest way to deduce what you have is pop a tie rod end off and measure it with a micrometer, then go to a local parts store and have them pull the corresponding tie rod end for a 71/72 c10 and a 73-87 c10 and compare/match. One of Those two spindles are the most likely that were used.

05-10-2023, 07:28 PM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: Front end rebuild kit question Do the spindles have any part numbers on them? The easiest way to deduce what you have is pop a tie rod end off and measure it with a micrometer, then go to a local parts store and have them pull the corresponding tie rod end for a 71/72 c10 and a 73-87 c10 and compare/match. One of Those two spindles are the most likely that were used. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man