Quote:
Originally Posted by custom10nut
You say your high beam indicator does work, and the turn signal inside doesn't work?
Do the turn signals work right with the headlights off?
Mine is doing the same thing, but I know what it is.
The grounds on your circuit board. Humidity creates corrosion and causes the break in continuity. Clean all the grounds, clean all the bulb sockets, and add a light coat of Dielectric Grease to the contacts.
That should fix your issue
|
While you are doing that, check the ground wire for the cluster and make sure it is connected and making good contact. Wiggle the clip back and forth or pull it off and re-install it to make sure the teeth are biting into bare metal.
LockDoc