|
Re: Removing SM465 with bellhousing; support BBC?
-
OK, I think I figured out what I did with the front "U" joint. I used the rear bolt on yoke from the original SM465 transmission. (it bolts right on the NV4500) That way I could use the stock "U" joints. The receipt I have is from O'Reilly Auto Parts and the part number is PRE 331. Be sure and check that out because I think I replaced all of the "U" joints at the same time.
Anyway if you use the SM465 bolt on yoke, your original "U" joint should fit it.
LockDoc
|