Quote:
Originally Posted by twistedchevy
Any progress
|
Yes, as a matter of fact I am almost ready to try firing it up. Finished installing the booster and plumbing the brakes, soldered all of the fuse and relay connections, and finally figured out the under dash wiring. Just finishing up the fuel fill hose on it and double checking everything. I went to town and filled up a couple of gas cans a while ago.
I used the trans linkage from a TH400 and everything worked out good. I had to re-drill two holes in the frame for the linkage pivot bracket but other than that everything bolted right up.... Getting the TCC wires connected to the extra contacts on the brake light switch was a fun job...NOT!! All of that small stuff is what's time consuming. That and looking for parts that I put somewhere safe so I wouldn't lose them..
I don't have the front clip on it yet but should be able to get that done this weekend, hopefully.
No pictures right now because I forgot to bring the camera out to the shop with me.
LockDoc