The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**The Rocknrod** · 11-08-2018, 12:27 PM

1/4-20 Cage nut? - search for that name.
Mine look like they were pressed in and don't jiggle around like the arm rest cage nuts. I looked from behind also.
An option would be a cage nut or a nutsert. Either one would modify the hole in the door panel slightly.
https://www.mcmaster.com/cage-nuts (see Steel Snap-In Nuts at the end of the page).
This guy had a similar problem - http://67-72chevytrucks.com/vboard/s...02&postcount=3
Nutserts:

There are also the hand drawn units: https://www.pegasusautoracing.com/pr...sp?Product=655
Harbor freight sells a cheap set up - https://www.harborfreight.com/45-pie...-kit-1210.html

11-08-2018, 12:27 PM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 1962 GMC Truck Nuts on the Interior Door 1/4-20 Cage nut? - search for that name. Mine look like they were pressed in and don't jiggle around like the arm rest cage nuts. I looked from behind also. An option would be a cage nut or a nutsert. Either one would modify the hole in the door panel slightly. https://www.mcmaster.com/cage-nuts (see Steel Snap-In Nuts at the end of the page). This guy had a similar problem - http://67-72chevytrucks.com/vboard/s...02&postcount=3 Nutserts: There are also the hand drawn units: https://www.pegasusautoracing.com/pr...sp?Product=655 Harbor freight sells a cheap set up - https://www.harborfreight.com/45-pie...-kit-1210.html __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 11-08-2018 at 12:56 PM.