Quote:
Originally Posted by C10_ustacould
Ok, here is what I have...
So my motor doesn't have the washer pump, so how do I make the connections? Should I de-pin the connectors and use individual spade connectors? If I do this where do the connections go? I have the wiring diagram but it doesn't help with identifying where the connections go on the motor. Any help would be greatly appreciated.
|
The brown connector is for the washer pump & the two Black ones are for the wiper. Since your motor has four terminals the larger black connector plugs into the two center terminals on the wiper motor and the single black connector plugs into the terminal above that. The notches in the connectors fit over bumps on the terminals so they can't be plugged in wrong. The forth terminal on your motor is just an extra terminal used on the earlier trucks. (before '67)
here is a picture....
You can just leave the washer connector if you want but I would wrap some tape around it.
LockDoc