|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-20-2015, 10:03 PM
|
#1 |
|
Registered User
Join Date: Nov 2013
Location: Keller, TX (DFW)
Posts: 45
|
wiper switch - help me troubleshoot
Wiper switch on my 71 has not functioned right since I've owned it. I can turn the knob to the first or second click and nothing happens. When I push the knob in the wipers take one pass and then quit. I do not have a washer tank or washer fluid lines on the truck, not sure about a washer pump. Before I order a new switch can someone offer any ideas? I removed the switch and cleaned the terminals today. How would I test the switch with a voltmeter?
__________________
"Life is too short to use cheap zip ties" 64 C10 SWB 71 C10 LWB 72 C10 LWB |
|
|
|
09-20-2015, 10:49 PM
|
#2 |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,364
|
Re: wiper switch - help me troubleshoot
-
All three wires on the switch are grounds. The switch grounds one wire for high speed operation, two wires are grounded for low speed operation and the third wire grounds the washer solenoid to activate the washers. Make sure that the switch itself has a good ground. You may find this thread helpful.... http://67-72chevytrucks.com/vboard/s...d.php?t=413551 LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
