VA Holley carb MSD distributor and aluminum pulleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PGSigns** · 09-13-2015, 01:24 PM

Some more stuff from around the shop.
Holley 0-81670 415 670 cfm street avenger. I bought this and ran it about a 100 miles chasing an engine issue that ended up being a bad muffler. Paid $399 from summit for the carb and another $50 for the TV cable brackets $350 for the carb, $30 for the brackets or $360 for it all.
MSD pro billet distributor in good shape. Was saving for the 65 but now going LS. $225 SOLD
Set of new billet pulleys and brackets for small block with a long water pump. All have been powder coated. Going LS so need a new home. $125 for the set. Sold
Thanks
Jimmy

**michael bustamante** · 09-14-2015, 12:19 PM

can i see a pic of the carb tv cable assy?

**PGSigns** · 09-14-2015, 12:49 PM

I'll take one tonight.
Jimmy

Marv D · 09-14-2015, 01:30 PM

dibbs on the distributor

Jimmy you have a PM

**PGSigns** · 09-15-2015, 08:17 PM

Marv the box went out today.
Jimmy

**michael bustamante** · 10-06-2015, 01:19 PM

any luck with the tv cable adaptor set up pics?

**PGSigns** · 10-06-2015, 01:52 PM

To be honest forgot to do it. will try and do it in the next day or so. Everything in the shop is stacked on the benches and anything else I had to get it up off the floor. The high tides with this last big storm were a pain.
Jimmy

**tigerburns** · 10-13-2015, 10:21 PM

Jimmy do you still have the pulleys and brackets? Do you know if they will fit a 350? Is one of the brackets for a power steering pump/reservoir?

**PGSigns** · 10-14-2015, 06:54 AM

I still have the brackets. They will fit a 350 with a long water pump and the brackets shown are for the alternator.
Jimmy

**tigerburns** · 10-14-2015, 10:10 AM

Would you take $100 for them?

**PGSigns** · 10-14-2015, 12:37 PM

How about $115 shipped.
Jimmy

**tigerburns** · 10-14-2015, 01:38 PM

Sounds good...sending PM

**PGSigns** · 11-18-2015, 08:15 PM

This carb still needs a good home.
Jimmy

09-13-2015, 01:24 PM	#1
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Holley carb MSD distributor and aluminum pulleys Some more stuff from around the shop. Holley 0-81670 415 670 cfm street avenger. I bought this and ran it about a 100 miles chasing an engine issue that ended up being a bad muffler. Paid $399 from summit for the carb and another $50 for the TV cable brackets $350 for the carb, $30 for the brackets or $360 for it all. MSD pro billet distributor in good shape. Was saving for the 65 but now going LS. $225 SOLD Set of new billet pulleys and brackets for small block with a long water pump. All have been powder coated. Going LS so need a new home. $125 for the set. Sold Thanks Jimmy Attached Images __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic Last edited by PGSigns; 10-15-2015 at 06:47 AM.

09-14-2015, 12:19 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,832	Re: Holley carb MSD distributor and aluminum pulleys can i see a pic of the carb tv cable assy? __________________ 1967custom

09-14-2015, 12:49 PM	#3
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Holley carb MSD distributor and aluminum pulleys I'll take one tonight. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-14-2015, 01:30 PM	#4
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: Holley carb MSD distributor and aluminum pulleys dibbs on the distributor Jimmy you have a PM __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

09-15-2015, 08:17 PM	#5
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Holley carb MSD distributor and aluminum pulleys Marv the box went out today. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-06-2015, 01:19 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,832	Re: Holley carb MSD distributor and aluminum pulleys any luck with the tv cable adaptor set up pics? __________________ 1967custom

10-06-2015, 01:52 PM	#7
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Holley carb MSD distributor and aluminum pulleys To be honest forgot to do it. will try and do it in the next day or so. Everything in the shop is stacked on the benches and anything else I had to get it up off the floor. The high tides with this last big storm were a pain. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-13-2015, 10:21 PM	#8
tigerburns Active Member Join Date: Aug 2015 Location: Greenville, SC Posts: 129	Re: Holley carb MSD distributor and aluminum pulleys Jimmy do you still have the pulleys and brackets? Do you know if they will fit a 350? Is one of the brackets for a power steering pump/reservoir?

10-14-2015, 06:54 AM	#9
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Holley carb MSD distributor and aluminum pulleys I still have the brackets. They will fit a 350 with a long water pump and the brackets shown are for the alternator. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-14-2015, 10:10 AM	#10
tigerburns Active Member Join Date: Aug 2015 Location: Greenville, SC Posts: 129	Re: Holley carb MSD distributor and aluminum pulleys Would you take $100 for them?

10-14-2015, 12:37 PM	#11
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Holley carb MSD distributor and aluminum pulleys How about $115 shipped. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-14-2015, 01:38 PM	#12
tigerburns Active Member Join Date: Aug 2015 Location: Greenville, SC Posts: 129	Re: Holley carb MSD distributor and aluminum pulleys Sounds good...sending PM

11-18-2015, 08:15 PM	#13
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Holley carb MSD distributor and aluminum pulleys This carb still needs a good home. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.