ford bolt pattern on chevy
ok so first off, i know some people are going to pull their hair out and yell at me for this, just know your rants fall on deaf ears, i am not looking for your opinion of what i should do with my truck, only tech help, now that we are clear on that, my question is as follows:
is there a way to convert the FRONT of a 67-72 c10 from the stock 6lug pattern to the big ford 5x5.5 truck pattern (spindles that fit the ford rotor, ford rotor that fits on chevy spindle, etc), i know what your going to say "you idiot why would you want to do that", simple, i have a ford 9" that was given to me that i intend to swap into my truck in place of the 12 bolt, for obvious reasons, i know you can convert the rear to 6 lug chevy pattern, the only swap kit i found is 800 bucks, so if i can swap the front to the ford pattern to match the rear for cheaper, i am willing to buy new wheels (cause lets be honest, ford wheels are cheap too).
i know speedway has rotors that fit the chevy spindle and has a ford pattern, HOWEVER, they use the small ford car pattern, i want the big truck pattern, if someone sells rotors that have the big pattern and fit on chevy spindles, that would be perfect.
thanks for any advice.
|