![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#11 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,120
|
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build
I got a new tool the other day, it works great. An air nibbler. It was about $47 and I think it will pay for itself quickly. The thin cutting wheels I've been using work fine, but are about $2 each and burn up very quick. I went through 2 and a half just cutting the tailgate section the other day. The nibbler works faster and doesn't blow sparks and grit into my face.
![]() Work continues on the pass side door. I started with doing the patch for the skin. Nice fit there. ![]() Welded it in and cleaned up the welds. ![]() Had a small hole on the inner panel lower front corner, so I patched it up a bit. ![]() Got the fat mat layed in. ![]() Started putting the inner patch panel in. This is as far as I got today. I should be able to finish it up this week. ![]() ![]() How am I doing James?
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
Bookmarks |
|
|