No Limit Trailing Arm Rear Suspension

[vtekdis]

Originally Posted by robnolimit

We sure do. We can prep both standard 9" big bearing housing/axles. or floaters. Pricing breaks down like this.

9" heavy duty Moser housing with billit Torino (big bearing late model) ends, pinion centered, with fill and drain added + Moser 31 spline axles with access hole, 2 1/2" offset, bearings and seals and 1/2" x 20 studs. Standard C10 width is 63" WMS (wheel mount surface) - can be 62" or 61", no extra charge. With No Limit brackets welded* $1,295.00

9" BBLM brakes 11" Explorer style, drilled/slotted = $590
12.19" x 4 piston Wilwood = $895
13" x 4 piston Wilwood = $1785

9" Moser heavy duty floater housing, fill and drain added. Steel hubs and drive plates, all bearings, seals, retainers, 31 spline axles. Pinion centered, 63" std WMS. - 60" to 62" avail also. No Limit brackets welded = $1395

Floater brakes 11" Speedway style with Wilwood Superlite (no E Brake) $745
12" Wilwood w/E-brake in caliper $895
13" Wilwood with Superlite and Mech spot E-brake caliper $1680
For drilled/slotted rotors on these kits add $90

* Brackets not included, but are part of No Limit suspension packages.

So no welding required just bolt it in? What do you guys carry as far as the 3rd members and what would you recommend for autox?