rear panel template ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teamharvey · 01-12-2005, 06:07 PM

Anyone finished with the template that Diane was sending out ? I could use one.

Bret

teamharvey · 01-24-2005, 10:39 PM

ttt........I will pay !

bagged72blaz · 01-30-2005, 11:36 AM

:tj: These are easy to make yourself. First measure front to back and top to bottom, and cut out a rectangle in that size.(I used 3/4" high density partical board). Then put that on the inside of the wheel well and then use a piece of cardboard cut to the width of the wheel well. and draw the line out and cut. Then radius the edges with a routor. And rap the thing with 1/4" thick foam and then with the material you want.

Sorry I suck at directions.

01-12-2005, 06:07 PM	#1
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	rear panel template ? Anyone finished with the template that Diane was sending out ? I could use one. Bret __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

01-24-2005, 10:39 PM	#2
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	ttt........I will pay ! __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

01-30-2005, 11:36 AM	#3
bagged72blaz Got L.E.D.s Join Date: Dec 2004 Location: Craig Co. Posts: 195	:tj: These are easy to make yourself. First measure front to back and top to bottom, and cut out a rectangle in that size.(I used 3/4" high density partical board). Then put that on the inside of the wheel well and then use a piece of cardboard cut to the width of the wheel well. and draw the line out and cut. Then radius the edges with a routor. And rap the thing with 1/4" thick foam and then with the material you want. Sorry I suck at directions. __________________ Bagged 1972 2wd Blazer http://www.earlyclassic.com/home.aspx



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.