The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-04-2002, 11:02 PM   #1
Terry'sToy
Registered User
 
Join Date: Oct 2002
Location: Victoria B.C
Posts: 109
Question Where do I get coupler or slip joint for column?

I have some slop in the coupler on the steering column. This is the piece under the hood about a 1/3 of the way down the column. One half of the shaft slides into the other with a couple of bits and pieces inside. It's the piece just after the spring.
Ugh I hope this explanation helps cause it sounds like a mess to me
I took the truck to the alignment shop and they called with a list of pieces to fix before I bring it back to actually get it aligned.
Thanks for any help

Terry
__________________
69 GMC 1/2 ton lwb, LS1, headers X-pipe 4L60E Yank 3500 stall 3.73 w/eaton brute force. moroso trick front springs,jeep rear springs, QA1's
Terry'sToy is offline   Reply With Quote
Old 12-05-2002, 11:55 AM   #2
JimKshortstep4x4
Senior Member
 
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
Talking

I believe what you are refering to is called the steering shaft extension, and it is an assembly from the upper shaft to the rag joint. I would try posting on the parts board and someone should be able to help you.

Jim
JimKshortstep4x4 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com