Anybody bought the Ididit billet steering column? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low68 · 12-10-2002, 04:52 PM

Ok, I took some pics. There are eight of them total. Some are of the seat and the others are of the steering column. first one

Low68 · 12-10-2002, 04:57 PM

Oh, and about the leather or velour...If I was buying another seat, I would probably still go with the leather. But then again, I really like leather seats.

Low68 · 12-10-2002, 05:01 PM

Here is the console. It is in the bottom portion of the middle seat, not the armrest portion. It is a pretty decent size. I can fit my cd case int it and it is a pretty big cd case. 2cds by 1 cd. Anyways, I like it because I don't think many people would think to look there for a compartment.

Low68 · 12-10-2002, 05:03 PM

Here is a picture of the headrests. The passenger side is leaned forward and the driver side is leaned back. That is a nice feature.

Low68 · 12-10-2002, 05:07 PM

here is a steering column pic. I am pretty sure that the steering column is a 33' column or 32 or whatever that one is.

Low68 · 12-10-2002, 05:10 PM

another.

Low68 · 12-10-2002, 05:13 PM

Here you can see on the outside of the firewall.

Low68 · 12-10-2002, 05:16 PM

the last one. Here is a close up of the shaft that I bought from flaming river. It gets rid of the rubber steering coupler and removed a little slack. Plus it looks a whole lot better imo.

12-10-2002, 04:52 PM	#26
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Ok, I took some pics. There are eight of them total. Some are of the seat and the others are of the steering column. first one Attached Images __________________ Build Thread

12-10-2002, 04:57 PM	#27
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Oh, and about the leather or velour...If I was buying another seat, I would probably still go with the leather. But then again, I really like leather seats. Attached Images __________________ Build Thread

12-10-2002, 05:01 PM	#28
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Here is the console. It is in the bottom portion of the middle seat, not the armrest portion. It is a pretty decent size. I can fit my cd case int it and it is a pretty big cd case. 2cds by 1 cd. Anyways, I like it because I don't think many people would think to look there for a compartment. Attached Images __________________ Build Thread

12-10-2002, 05:03 PM	#29
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Here is a picture of the headrests. The passenger side is leaned forward and the driver side is leaned back. That is a nice feature. Attached Images __________________ Build Thread

12-10-2002, 05:07 PM	#30
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	here is a steering column pic. I am pretty sure that the steering column is a 33' column or 32 or whatever that one is. Attached Images __________________ Build Thread

12-10-2002, 05:10 PM	#31
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	another. Attached Images __________________ Build Thread

12-10-2002, 05:13 PM	#32
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Here you can see on the outside of the firewall. Attached Images __________________ Build Thread

12-10-2002, 05:16 PM	#33
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	the last one. Here is a close up of the shaft that I bought from flaming river. It gets rid of the rubber steering coupler and removed a little slack. Plus it looks a whole lot better imo. Attached Images __________________ Build Thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.