The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1960-1966 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Closed Thread
 
Thread Tools Display Modes
Old 03-29-2008, 08:06 AM   #101
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by 71'tahoe View Post
Do you have any good doors,fenders,inner fenders,core support or fan shrouds for a 1-ton 65' with a striaght six engine??
I sent you a PM with information regarding these parts. Do you still need them? If so, let me know if I can help and please keep me in mind for your other 4-5-6 Chevy Truck parts in the future.
LILRED66 is offline  
Old 03-31-2008, 01:38 AM   #102
Mitch6667
Registered User
 
Join Date: Oct 2007
Location: Parsonsburg, Maryland
Posts: 37
Re: Do you need '64-'66 Chevy Truck Parts?

Do you have a grille support, right and left inner fenders, radiator support and a right side fender? If so could you send me pics and prices? mitch.loring@goblc.com

Thanks,
Mitch
Mitch6667 is offline  
Old 03-31-2008, 03:16 AM   #103
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by Mitch6667 View Post
Do you have a grille support, right and left inner fenders, radiator support and a right side fender? If so could you send me pics and prices? mitch.loring@goblc.com

Thanks,
Mitch
Mitch:

Thanks for your interest in my 4-5-6 Chevy Truck parts. I have all of the parts you are seeking with the exception of a radiator support. I have taken photos and I will send them to you, via your e-mail listed above, along with description and pricing, including packaging and shipping.

Thanks again for your interest and let me know if I can help you with other 4-5-6 Chevy Truck parts in the future.
LILRED66 is offline  
Old 04-01-2008, 09:49 PM   #104
nxtruck
Registered User
 
nxtruck's Avatar
 
Join Date: Jun 2006
Location: Jackson, Mo.
Posts: 607
Re: Do you need '64-'66 Chevy Truck Parts?

Tony,
would you have a wiper linkage assy. and a good 2-spd. wiper motor for a '66 Chevy? If so, how much shipped to 63703?
Thanks in advance!
Chris
nxtruck is offline  
Old 04-02-2008, 05:19 AM   #105
1966gmc
Why does it taste purple?
 
1966gmc's Avatar
 
Join Date: Sep 2007
Location: Cambridge Md
Posts: 621
Re: Do you need '64-'66 Chevy Truck Parts?

How about a radiator for a v8 auto 66 to zip code 21613
1966gmc is offline  
Old 04-02-2008, 10:55 AM   #106
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by nxtruck View Post
Tony,
would you have a wiper linkage assy. and a good 2-spd. wiper motor for a '66 Chevy? If so, how much shipped to 63703?
Thanks in advance!
Chris
Chris:

Thanks for your inquiry. I have a complete wiper assembly linkage and a good 2-speed wiper motor for a 4-5-6 Chevy Truck. I will send you a PM with pricing, including shipping, via UPS, Ground.
LILRED66 is offline  
Old 04-02-2008, 11:02 AM   #107
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by 1966gmc View Post
How about a radiator for a v8 auto 66 to zip code 21613
Thanks for your interest in my 4-5-6 Chevy Truck parts. I have a few good, used factory Harrison 4-core radiators, sized for a V8. I will send you a PM with a description and pricing, including packaging & shipping, via UPS, Ground.
LILRED66 is offline  
Old 04-02-2008, 06:28 PM   #108
283 Man
Registered User
 
283 Man's Avatar
 
Join Date: Apr 2007
Location: Jane,Missouri
Posts: 844
Re: Do you need '64-'66 Chevy Truck Parts?

Tony,Thank You Again Matthews (my Son) very happy with Cab Salls will try get you pictures soon.Also wanted ask you how much are your (64-66) wheel tubs? what would you need in trade for two used ones? Thanks Morton.
283 Man is offline  
Old 04-02-2008, 07:13 PM   #109
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by 283 Man View Post
Tony,Thank You Again Matthews (my Son) very happy with Cab Salls will try get you pictures soon.Also wanted ask you how much are your (64-66) wheel tubs? what would you need in trade for two used ones? Thanks Morton.
Morton:

I am glad to hear you and Matthew like the 4-5-6 Chevy Truck Custom Cab sails. They were one of the best pairs I had in my inventory. I dress them up by cleaning them up real good and installing 1/8" black pinstipping in the horizontal valleys and painting the "Custom" script with a black automotive touch-up paint pen. That really makes them pop.

I received the C20 emblems late last week. I was not aware they were missing all four of the mounting studs and speed nuts. I guess I will have to stick them on my rig.

In any case, I have a few good, used pairs of fleetside rear wheel tubs for sale. They are $175.00, plus $60.00 packaging & shipping, via UPS, Ground. They are in very good condition with no rust-thru at the mounting lip and very few minor blemishes/dents. As far as a trade, I have a few fellows interested in these wheel tubs, as part of a complete swb fleetside bed package, so I would have to do a cash deal on them.

Thanks for the C20 emblems and let me know if I can help you with these or other 4-5-6 Chevy Truck parts in the future.
LILRED66 is offline  
Old 04-02-2008, 09:36 PM   #110
Bob'sK10CHEVY
Registered User
 
Join Date: Apr 2008
Location: Greenville, SC
Posts: 18
Re: Do you need '64-'66 Chevy Truck Parts?

I'm looking for a set of motor stands from frame to motor mount for a 1966 K10 4X4 V8 327. Can you help?
Bob'sK10CHEVY is offline  
Old 04-02-2008, 11:08 PM   #111
283 Man
Registered User
 
283 Man's Avatar
 
Join Date: Apr 2007
Location: Jane,Missouri
Posts: 844
Re: Do you need '64-'66 Chevy Truck Parts?

Sorry Tony about the missing bolts or nutts on C-20 badges.That was one of the few things I saved from that truck the C-20 badges.
283 Man is offline  
Old 04-03-2008, 11:18 AM   #112
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by Bob'sK10CHEVY View Post
I'm looking for a set of motor stands from frame to motor mount for a 1966 K10 4X4 V8 327. Can you help?
Bob:

Welcome aboard from Kansas City, KS. You have a personal message regarding these parts...let me know if I can help.
LILRED66 is offline  
Old 04-05-2008, 10:52 AM   #113
283 Man
Registered User
 
283 Man's Avatar
 
Join Date: Apr 2007
Location: Jane,Missouri
Posts: 844
Re: Do you need '64-'66 Chevy Truck Parts?

Tony, heads up there is a guy on www.classicparts.com the forum look on 1960-1966 forum that has a 66 3/4 ton Custom Camper truck with the RARE Badges on his truck out of Texas his name bobcat77,you might give him a shout dont have any idea if he would sale the emblems or not just got my eyes openknow you looking for them. THANKS Morton 283 man...
283 Man is offline  
Old 04-05-2008, 03:12 PM   #114
RWilliams
Registered User
 
Join Date: Sep 2005
Location: Georgia
Posts: 22
Re: Do you need '64-'66 Chevy Truck Parts?

Hello,

I am looking for a few rather obscure parts for my '65 Chevy that I am restoring. I have several parts catalogs, but have been unable to locate these pieces.

Do you have, or know a source for the plastic rollers that fit on the window regulator that ride in the window channel? The ones I have are flattened out on one side.

Also, on the bottom of my glove compartment door, on the back side, there appears to have once been some type of flat spring. I have part of the original, but it is broken.

Finally ( for now ), on the rear Step Side bumper, there is a cover that fits over the bumper brace, between the bottom of the tailgate and the bumper. One of mine is missing.

Any assistance you could provide would be most helpful. Take your time on these as I am not in the assembly stage yet.
RWilliams is offline  
Old 04-05-2008, 05:29 PM   #115
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by RWilliams View Post
Hello,

I am looking for a few rather obscure parts for my '65 Chevy that I am restoring. I have several parts catalogs, but have been unable to locate these pieces.

Do you have, or know a source for the plastic rollers that fit on the window regulator that ride in the window channel? The ones I have are flattened out on one side.

Also, on the bottom of my glove compartment door, on the back side, there appears to have once been some type of flat spring. I have part of the original, but it is broken.

Finally ( for now ), on the rear Step Side bumper, there is a cover that fits over the bumper brace, between the bottom of the tailgate and the bumper. One of mine is missing.

Any assistance you could provide would be most helpful. Take your time on these as I am not in the assembly stage yet.
RWilliams:

Good morning and thanks for your interest in my 4-5-6 Chevy Truck parts. I have all the obscure 4-5-6 Chevy Truck parts you are looking for will send you a PM regarding the same.

Thanks for your interest and let me know if I can help you with these or other 4-5-6 Chevy Truck parts in the future.
LILRED66 is offline  
Old 04-05-2008, 05:56 PM   #116
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by 283 Man View Post
Tony, heads up there is a guy on www.classicparts.com the forum look on 1960-1966 forum that has a 66 3/4 ton Custom Camper truck with the RARE Badges on his truck out of Texas his name bobcat77,you might give him a shout dont have any idea if he would sale the emblems or not just got my eyes openknow you looking for them. THANKS Morton 283 man...
Morton:

Thanks for the lead...I will follow-up on this one. Thanks for keeping an eye out for me.
LILRED66 is offline  
Old 04-05-2008, 10:55 PM   #117
283 Man
Registered User
 
283 Man's Avatar
 
Join Date: Apr 2007
Location: Jane,Missouri
Posts: 844
Re: Do you need '64-'66 Chevy Truck Parts?

No problem anytime...
283 Man is offline  
Old 04-07-2008, 12:08 AM   #118
shortbed70
Registered User
 
shortbed70's Avatar
 
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
Re: Do you need '64-'66 Chevy Truck Parts?

I am looking at getting the rear tail light sections for my 65 from top to bottom. The pieces of bodywork on both sides of the tailgate. Do you have any and what would you ship to 66535?
__________________
Troy

1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb

my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884

Big Red Dog build
http://67-72chevytrucks.com/vboard/s...d.php?t=572274
shortbed70 is offline  
Old 04-08-2008, 02:59 PM   #119
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by shortbed70 View Post
I am looking at getting the rear tail light sections for my 65 from top to bottom. The pieces of bodywork on both sides of the tailgate. Do you have any and what would you ship to 66535?
Thanks for your interest in my 4-5-6 Chevy Truck parts. I have a few pairs of rear fleetside bed tail light panels for a '60-'66 Chevy truck. They will be removed just in front of the vertical seam, so they will need to be trimmed to fit. They are shells and do not include the tailgate chains, tail light assemblies or reverse light assemblies.

The pair is $150.00, plus $40.00 packaging & shipping, via UPS, Ground. Let me know your thoughts with these parts or other 4-5-6 Chevy Truck parts and I will proceed accordingly.
LILRED66 is offline  
Old 04-09-2008, 01:28 PM   #120
truckn'
Registered User
 
truckn''s Avatar
 
Join Date: Aug 2006
Location: rogersville tennessee
Posts: 276
Re: Do you need '64-'66 Chevy Truck Parts?

Tony do you happen to have a big tranny hump laying around? Wanting to put 4 speed in and will have to change out.
truckn' is offline  
Old 04-09-2008, 06:31 PM   #121
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by truckn' View Post
Tony do you happen to have a big tranny hump laying around? Wanting to put 4 speed in and will have to change out.
I have a high hump tranny cover. I will send you a PM with this information. Thanks for your interest in my 4-5-6 Chevy Truck parts and let me know if I can help you with this part or other 4-5-6 Chevy Truck parts in the future.
LILRED66 is offline  
Old 04-09-2008, 11:24 PM   #122
botsdots
Registered User
 
Join Date: Jan 2008
Location: Katy, TX
Posts: 47
Re: Do you need '64-'66 Chevy Truck Parts?

Tony, I sent you a PM regarding cab mount perches.

Thanks,
Daniel
botsdots is offline  
Old 04-10-2008, 04:55 PM   #123
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by botsdots View Post
Tony, I sent you a PM regarding cab mount perches.

Thanks,
Daniel
Daniel:

You have a PM in response to your request for rear cab-to-frame mount perches. Thanks for your continued interest in my 4-5-6 Chevy Truck parts. Please let me know if I can help you with these parts or other 4-5-6 Chevy Truck parts in the future.
LILRED66 is offline  
Old 04-11-2008, 06:09 AM   #124
shortbed70
Registered User
 
shortbed70's Avatar
 
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
Re: Do you need '64-'66 Chevy Truck Parts?

Would you be interested in selling just one side and is me picking them up ok? I'm not that far away. Thanks.
Quote:
Originally Posted by LILRED66 View Post
Thanks for your interest in my 4-5-6 Chevy Truck parts. I have a few pairs of rear fleetside bed tail light panels for a '60-'66 Chevy truck. They will be removed just in front of the vertical seam, so they will need to be trimmed to fit. They are shells and do not include the tailgate chains, tail light assemblies or reverse light assemblies.

The pair is $150.00, plus $40.00 packaging & shipping, via UPS, Ground. Let me know your thoughts with these parts or other 4-5-6 Chevy Truck parts and I will proceed accordingly.
__________________
Troy

1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb

my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884

Big Red Dog build
http://67-72chevytrucks.com/vboard/s...d.php?t=572274
shortbed70 is offline  
Old 04-11-2008, 10:15 AM   #125
Iron-Butt
454 club
 
Iron-Butt's Avatar
 
Join Date: Oct 2002
Location: Oklahoma
Posts: 1,348
Re: Do you need '64-'66 Chevy Truck Parts?

Well Tony, I almost destroyed the hood going home. I was 20 miles from my family's residence (Arkansas) when they called me and told me and dad to pull over as there was golf ball size hail and 10 tornados in the Fort Smith area. We stopped under a big over pass and let it blow over. Yea no DAMAGE.
__________________
David
1965 Chevrolet c-10 454 automatic Custom bbw swb.
1965 Chevrolet C-10 swb (Sold)
1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's.
R.I.P "I will miss you.
1967 Chevrolet C-10 6 Cyl Custom lwb
1939 Chevrolet Coupe, 350 v8 automatic.
1935 Chevrolet 2 Dr Standard in the works.
2015 Harley Davidson Street Glide.
2023 Chevrolet Stingray Z51 Convertible.

I never want to grow up.
Iron-Butt is offline  
Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:38 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com