67-68 Buckets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**breeh** · 04-20-2003, 12:50 AM

I just bought a set of 68 buckets from a board member and I have a question. There is no way to adjust these seats forward or backward. They mount in a fixed position. Is this correct?

cheyenne10 · 04-20-2003, 01:41 AM

Drivers should have tracks, passenger fixed to overall frame if I remember right. Just set them aside and I'll pickem up one of these months!! I'm still waiting to find my set...

**PICKMUP** · 04-20-2003, 03:21 PM

Yup, only the driver's side slides. I am down to two sets for sale. I am saving one set for my little Hot Six project. Although the interior is done in a bench, I got tired of seeing all my customers getting those seats from me and really looking sharp when finished! I want a set, too!

**breeh** · 04-20-2003, 04:26 PM

Well, both sides are fixed on this set. I guess I will be looking for a needle in a haystack to try and find the missing sliders. How about it? Anybody have any sliders?

**1970 CST Short Wide** · 04-20-2003, 05:09 PM

Mine are both fixed also. Anybody have two sets of sliders?

Roberty · 04-20-2003, 05:29 PM

You would probably be better off adapting a set of sliders off a later model set of buckets. It probably would be like looking for a needle in a haystack to try and find the missing sliders.

Brad · 04-20-2003, 07:04 PM

We don't have sliders here in the NW-it's a midwest thing, thank God!

BLAZERMAN · 04-20-2003, 08:10 PM

breeh, I dont have any for sale but thought I would give you a peek at what youll be looking for.

**breeh** · 04-20-2003, 08:54 PM

Thanks BLAZERMAN, that is very helpful. I am wondering if I can cut up a set of standard bench sliders and make them work.

Mountain Man · 04-20-2003, 10:04 PM

I have a set of sliders. I took them off my 67 set because I didn't have enough head room with them installed. PM me and tell me how much you want to pay. You will have to pay shipping from Alberta also.

**breeh** · 04-21-2003, 02:17 PM

Mountain Man, PM sent....

04-20-2003, 12:50 AM	#1
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	67-68 Buckets I just bought a set of 68 buckets from a board member and I have a question. There is no way to adjust these seats forward or backward. They mount in a fixed position. Is this correct? __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

04-20-2003, 01:41 AM	#2
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	seat adjustments Drivers should have tracks, passenger fixed to overall frame if I remember right. Just set them aside and I'll pickem up one of these months!! I'm still waiting to find my set... __________________ Bob

04-20-2003, 03:21 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,123	TWO SETS Yup, only the driver's side slides. I am down to two sets for sale. I am saving one set for my little Hot Six project. Although the interior is done in a bench, I got tired of seeing all my customers getting those seats from me and really looking sharp when finished! I want a set, too! __________________ Email: frankeham@comcast.net Phone: 360-956-7170

04-20-2003, 04:26 PM	#4
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Well, both sides are fixed on this set. I guess I will be looking for a needle in a haystack to try and find the missing sliders. How about it? Anybody have any sliders? __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

04-20-2003, 05:09 PM	#5
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,088	Mine are both fixed also. Anybody have two sets of sliders? __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

04-20-2003, 05:29 PM	#6
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	You would probably be better off adapting a set of sliders off a later model set of buckets. It probably would be like looking for a needle in a haystack to try and find the missing sliders. __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

04-20-2003, 07:04 PM	#7
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Look for sliders on the White Castle post We don't have sliders here in the NW-it's a midwest thing, thank God! __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

04-20-2003, 08:10 PM	#8
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	sliders breeh, I dont have any for sale but thought I would give you a peek at what youll be looking for. Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-20-2003, 08:54 PM	#9
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Thanks BLAZERMAN, that is very helpful. I am wondering if I can cut up a set of standard bench sliders and make them work. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

04-20-2003, 10:04 PM	#10
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	I have a set of sliders. I took them off my 67 set because I didn't have enough head room with them installed. PM me and tell me how much you want to pay. You will have to pay shipping from Alberta also. __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

04-21-2003, 02:17 PM	#11
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Mountain Man, PM sent.... __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.