Who did the Caddy 11 inch rear discs ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slam33 · 05-30-2003, 07:08 PM

Picked up a full Caddy 11 inch rear disc set up with the calipers mounted one front and one rear. I thought I saw someones page on the convertion some time back. Anyone know that web page ? Oh, evrything was like new on the parts, I even got the parking brake cables that work the piston instead of the little shoe type.

Stroker · 05-31-2003, 01:16 AM

I'm not sure if this is what you're looking for but it might help.
http://home.pacbell.net/bigiron/Arti...rRearDisc.html

slam33 · 05-31-2003, 09:37 AM

Thanks Stroker, I'm looking for any mods I have to make to the backing plates/ mounts. The truck is a daily so I have to do all mods before I take it a part. This is the setup where the calipers are mounted one forward and one rearward. I know I have to find a place to get the axle flanges turned down so they fit the disc, anyone in So Cal got an idea ?

Rod · 05-31-2003, 01:44 PM

Hmmm I wondered where Steve Chins site had gone for a while.

**john** · 05-31-2003, 05:07 PM

Heres another
http://www.classicperform.com/tech_a...kes-trucks.htm

slam33 · 05-31-2003, 05:47 PM

Ya I saw the CPP site and I called them. I have the calipers, discs, and backing plates, however the plates don't bolt up to the axle housing becuse of a smaller mounting flange. The mount plates would be good to get but CPP doesn't want to talk to you unless you buy there whole kit. They told me they don't sell the plates alone.

**Palf70Step** · 05-31-2003, 08:26 PM

Might want to check with board member 72addict. He did a home setup on putting rear disks on his GMC. here is post where he mentioned a little bit about his rear discs.

http://67-72chevytrucks.com/vboard/s...threadid=53184

05-30-2003, 07:08 PM	#1
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Who did the Caddy 11 inch rear discs ? Picked up a full Caddy 11 inch rear disc set up with the calipers mounted one front and one rear. I thought I saw someones page on the convertion some time back. Anyone know that web page ? Oh, evrything was like new on the parts, I even got the parking brake cables that work the piston instead of the little shoe type. __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

05-31-2003, 01:16 AM	#2
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	I'm not sure if this is what you're looking for but it might help. http://home.pacbell.net/bigiron/Arti...rRearDisc.html __________________ 72 SWB parts and pieces Oklahoma

05-31-2003, 09:37 AM	#3
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Thanks Stroker, I'm looking for any mods I have to make to the backing plates/ mounts. The truck is a daily so I have to do all mods before I take it a part. This is the setup where the calipers are mounted one forward and one rearward. I know I have to find a place to get the axle flanges turned down so they fit the disc, anyone in So Cal got an idea ? __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

05-31-2003, 01:44 PM	#4
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Hmmm I wondered where Steve Chins site had gone for a while. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-31-2003, 05:07 PM	#5
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Heres another http://www.classicperform.com/tech_a...kes-trucks.htm __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

05-31-2003, 05:47 PM	#6
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Ya I saw the CPP site and I called them. I have the calipers, discs, and backing plates, however the plates don't bolt up to the axle housing becuse of a smaller mounting flange. The mount plates would be good to get but CPP doesn't want to talk to you unless you buy there whole kit. They told me they don't sell the plates alone. __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

05-31-2003, 08:26 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,754	Might want to check with board member 72addict. He did a home setup on putting rear disks on his GMC. here is post where he mentioned a little bit about his rear discs. http://67-72chevytrucks.com/vboard/s...threadid=53184 __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.