Placement of "4 wheel drive" emblem on a 70 blazer?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970blazin · 12-07-2003, 03:30 PM

Does anyone have these measurements?? I know that my CST blazer (1970) was an original 307 so the emblem under the front side marker light is supposed to be a "4 wheel drive" emblem. If it was ordered with a 350 then this emblem would be a "8 350" emblem. Any pics or diagrams would be greatly appreciated! Thanks-
Diane

Blazer1970 · 12-07-2003, 05:49 PM

Actually, on a '70, the "8-350" emblem goes under the "K5/Blazer" emblem. If it is 4WD, the "4 Wheel Drive" emblem does go under the front side marker light as you stated. I believe '71 and '72 had the optional displacement emblems under the front side marker, and no "4 Wheel Drive" emblems. Sorry, I don't have measurements and my Blazer is 175 miles from here right now.

**Canadian694x4** · 12-07-2003, 07:28 PM

I don't know if mines in the correct place (as the PO Restored the truck, so ya never know)...Cause I have seen others placed directly under the marker light...but here's a pic of mine to further things along...hope it helps sum...

**Canadian694x4** · 12-07-2003, 07:32 PM

here's a pic directly under marker light...I think this is the correct location but unfortunately I can't give you any measurements...

casey · 12-07-2003, 07:57 PM

does anyone know what determined why some had the 4 wheel drive emblem and some didn't?

**Canadian694x4** · 12-07-2003, 08:11 PM

another better shot...

Casey good question...I just figured around 70/71 they figured engine displacement was a more important emblem (never seen 'em on a 71 and up)

1970blazin · 12-07-2003, 09:36 PM

I guess in 69/70 if you had the standard 307 engine then the "4 wheel drive" emblem went under the side marker. If you upgraded to the 350 engine then the emblem under the side marker is the "8 350" emblem and the "4 wheel drive" got moved to under the "K/5 Blazer" emblem. In 71 they did away with the "4 wheel drive" emblem. Just FYI.

Hooter · 12-07-2003, 09:45 PM

I don't think GM ever measured for them, they just stuck em on, in the relative area

cheyenne10 · 12-07-2003, 11:28 PM

My assumption is that these factories were all about production and making money. Shouldn't much if this been dene by jigs and machines? I think a factory assembly manual would show measurments to hundreth of inches for emblem pin holes.

charlieo · 12-08-2003, 01:36 AM

I've got the 67-72 factory assembly manual and found the specs but it doesn't givethe measurement from the marker light down to the 4x4 holes . Hole dia is 15/64 . Hole to hole ctr is 4.80" I just centered mine between the marker light and went down 2" (I think) from the bottom of the indentation for the marker light . I hope that helps !

**too much stuff** · 12-08-2003, 01:41 AM

My 70 blazer has it right under the marker light, and is a factory 6 cylinder.

1969 GMC · 12-08-2003, 02:16 AM

my GMC doesn't have any 4 wheel drive emblems, or any evidence that they were ever there. was this chevrolet only? or was it just random which 4x4's got it and which ones didn't? Or did it matter on assembly plant? Or, could I have some non-original fenders from a 2wd? hmm...

**Canadian694x4** · 12-08-2003, 02:22 AM

Quote:

Originally posted by 1969 GMC
my GMC doesn't have any 4 wheel drive emblems, or any evidence that they were ever there. was this chevrolet only? or was it just random which 4x4's got it and which ones didn't? Or did it matter on assembly plant? Or, could I have some non-original fenders from a 2wd? hmm...

It prolly wasn't GMC type emblem? Just like the GMC Longhorn didn't have badges??

1969 GMC · 12-08-2003, 03:22 AM

I'm not sure....I could have sworn I've seen a few GMC's with them, but maybe I'm wrong. In any case, when I eventually take my truck apart and restore it, I'd like to add a set...not original, but cool nonetheless.

70jimmy · 12-08-2003, 09:27 AM

GMC 's did get the 4x4 emblems under the marker lights but not the optional displacement emblems. My 70 Jimmy has the 4x4 emblems and it is all stock.

12-07-2003, 03:30 PM	#1
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	Placement of "4 wheel drive" emblem on a 70 blazer?? Does anyone have these measurements?? I know that my CST blazer (1970) was an original 307 so the emblem under the front side marker light is supposed to be a "4 wheel drive" emblem. If it was ordered with a 350 then this emblem would be a "8 350" emblem. Any pics or diagrams would be greatly appreciated! Thanks- Diane __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

12-07-2003, 05:49 PM	#2
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,510	Actually, on a '70, the "8-350" emblem goes under the "K5/Blazer" emblem. If it is 4WD, the "4 Wheel Drive" emblem does go under the front side marker light as you stated. I believe '71 and '72 had the optional displacement emblems under the front side marker, and no "4 Wheel Drive" emblems. Sorry, I don't have measurements and my Blazer is 175 miles from here right now. __________________ Tim Last edited by Blazer1970; 12-07-2003 at 05:51 PM.

12-07-2003, 07:28 PM	#3
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	I don't know if mines in the correct place (as the PO Restored the truck, so ya never know)...Cause I have seen others placed directly under the marker light...but here's a pic of mine to further things along...hope it helps sum... Attached Images __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

12-07-2003, 07:32 PM	#4
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	here's a pic directly under marker light...I think this is the correct location but unfortunately I can't give you any measurements... Attached Images __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154. Last edited by Canadian694x4; 12-07-2003 at 07:34 PM.

12-07-2003, 08:11 PM	#6
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	another better shot... Casey good question...I just figured around 70/71 they figured engine displacement was a more important emblem (never seen 'em on a 71 and up) Attached Images __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

12-07-2003, 07:57 PM	#5
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	does anyone know what determined why some had the 4 wheel drive emblem and some didn't?

12-07-2003, 09:36 PM	#7
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	I guess in 69/70 if you had the standard 307 engine then the "4 wheel drive" emblem went under the side marker. If you upgraded to the 350 engine then the emblem under the side marker is the "8 350" emblem and the "4 wheel drive" got moved to under the "K/5 Blazer" emblem. In 71 they did away with the "4 wheel drive" emblem. Just FYI. __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

12-07-2003, 09:45 PM	#8
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,078	I don't think GM ever measured for them, they just stuck em on, in the relative area __________________ MEMBER DISCS UP FRONT CLUB 69 custom camper/cst 10 70 monte carlo 383 stroker with a 700r4 77 fully loaded silverado (back in the backyard for a little while longer) 1980 BMW 320i (back in the garage finally) 1981 f@*d f150 4x4 (Robert red ford) tried to kill me 1972 Honda ct 90 trailbike Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com AC/DC RULES!!! First generation Monte Carlo club pictures of my life

12-07-2003, 11:28 PM	#9
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,511	manufaturing My assumption is that these factories were all about production and making money. Shouldn't much if this been dene by jigs and machines? I think a factory assembly manual would show measurments to hundreth of inches for emblem pin holes. __________________ Bob

12-08-2003, 01:36 AM	#10
charlieo Registered User Join Date: Feb 2003 Location: sw Posts: 341	dimentions I've got the 67-72 factory assembly manual and found the specs but it doesn't givethe measurement from the marker light down to the 4x4 holes . Hole dia is 15/64 . Hole to hole ctr is 4.80" I just centered mine between the marker light and went down 2" (I think) from the bottom of the indentation for the marker light . I hope that helps !

12-08-2003, 01:41 AM	#11
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	My 70 blazer has it right under the marker light, and is a factory 6 cylinder.

12-08-2003, 02:16 AM	#12
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	my GMC doesn't have any 4 wheel drive emblems, or any evidence that they were ever there. was this chevrolet only? or was it just random which 4x4's got it and which ones didn't? Or did it matter on assembly plant? Or, could I have some non-original fenders from a 2wd? hmm... __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

12-08-2003, 03:22 AM	#14
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	I'm not sure....I could have sworn I've seen a few GMC's with them, but maybe I'm wrong. In any case, when I eventually take my truck apart and restore it, I'd like to add a set...not original, but cool nonetheless. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

12-08-2003, 09:27 AM	#15
70jimmy Registered User Join Date: May 2000 Location: Darlington SC Posts: 115	GMC 's did get the 4x4 emblems under the marker lights but not the optional displacement emblems. My 70 Jimmy has the 4x4 emblems and it is all stock. __________________ 1972 CST Blazer 350/350/205 tilt, ac, white with blue highlander plaid interior 1972 CST Jimmy 350/4speed/205 med red with black interior 1972 K20 Custom Deluxe 350/4speed/205 white/ochre/white/ochre 1972 CST Blazer 350/350/205 tach, ac, warn 5687 winch, light yellow with saddle interior 1972 CST Jimmy 350/4speed/205 dark olive with olive interior



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.