AL 1968 2wd SWB Fleetside C10... Walter DeWayne - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nlped** · 07-29-2018, 06:43 PM

I'm going to start this add with an admission....I've come to the conclusion that I'm a square body guy, and that's why I just haven't moved forward on Walter. He's beautiful in his own gruff way, but I bought a 1977 Square yesterday & I don't have room or the finances for 2 big projects.

I'm selling Walter along with the 1968 specific parts for him. He is a 1968 C10 SWB Fleetside 2wd 507 blue jewel. He still has all his original pieces/parts including the 327/3OTT. I never attempted to get him running, but the motor does turn over with a pull bar on the crank bolt and the trans/clutch still engage and goes through the gears. My intentions were either an LSX swap or a BBC/700r4 swap.

I have a build thread that has plenty of pictures of him, and if you need more, please let me know and I'll snap them. He now lives in my climate controlled shop, but he's not been subjected to the elements since at least 1984 (the tag that was on it when I rescued him out of Granddads basement garage). He's got a wonk on the drivers side fender on the leading edge by the headlight, a little rust in the rockers and the front bed panel. He's still wearing his original paint/patina and is still a one owner ride. I have the original bill of sale, protecto plate, owners manual and the bill of sale from the original owner when I bought it 4 years ago.

New parts that need to go with him...

Blue high hump ACC carpet kit and "No hole" high hump
Stainless Steel door sill plates
Aftermarket Blue dash pad (not a cover)
Billet aluminum hood hinges
Painless Wiring 10206 harness
Fesler billet 2 piece taillights, and front and rear marker lights
Precision weatherstripping for entire cab & doors
Dakota Digital guages

And a tilt column that Les (70ShortFleet) completely rebuilt and painted 507 blue for me. It's still in his kicka$$ wooden crate he shipped it in & was only opened to ogle.

I also have quite a few small assundry used parts that will be included... i.e. extra set of door handles, extra trim pieces here and there etc.

Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=636095

New and final price, $10,000

**nlped** · 07-31-2018, 09:13 PM

I’ve had a few requests for pics, so I’ll get a bunch taken & posted Friday. I’ll also go through the “assundry” parts and make a more thorough list.

**nlped** · 08-03-2018, 02:50 PM

Here's a few pics of a few of the included parts...

**nlped** · 08-03-2018, 02:51 PM

Some more...

**nlped** · 08-03-2018, 02:55 PM

Couple more...

**nlped** · 08-03-2018, 03:06 PM

I tried to get a picture of the carpet, but the color washed out pretty bad in the pic. It is the correct light blue for Walt and is for a high hump too.

**nlped** · 08-12-2018, 06:55 PM

New and lowest price $10,000. Just the truck...$7500.

demoj21 · 08-14-2018, 01:46 PM

This truck is awesome. Good luck with the sale.

**MikeCofield** · 08-14-2018, 05:11 PM

Ed , interested in just the truck

**MikeCofield** · 08-14-2018, 06:57 PM

On sent

**nlped** · 08-14-2018, 07:45 PM

I pm’ed you guys back.

I’d also trade for a Roundeye square 3/4 ton crewcab (or ccsb) or a second gen camaro or trans am.

67shortstepside · 08-16-2018, 10:27 PM

would you sell the cigarette light and knobs ?

**nlped** · 08-17-2018, 06:25 AM

Quote:

Originally Posted by 67shortstepside

would you sell the cigarette light and knobs ?

I think I actually have 2 sets of them. Let me check when I get home this evening.

**nlped** · 08-19-2018, 05:53 PM

Except for the 2 guys out there that I gave a last chance...

Yeah, I bought more parts for Walter today while I was over in Atlanta. I’m thinking he’s staying here....

**Concordca** · 08-20-2018, 11:01 AM

Are you willing to sell the parts separately? I would be interested almost all of if other than the dash pad and carpet. If so what wold shipping be to 94517? Thanks, Josh

**nlped** · 08-20-2018, 02:24 PM

Quote:

Originally Posted by Concordca

Are you willing to sell the parts separately? I would be interested almost all of if other than the dash pad and carpet. If so what wold shipping be to 94517? Thanks, Josh

See my previous post... if neither of the guys I’ve talked with about purchasing Walter back out, I’m going to keep him, so I’ll need the parts.

**nlped** · 08-24-2018, 10:49 PM

Keepin’ Him!

07-29-2018, 06:43 PM	#1
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	1968 2wd SWB Fleetside C10... Walter DeWayne I'm going to start this add with an admission....I've come to the conclusion that I'm a square body guy, and that's why I just haven't moved forward on Walter. He's beautiful in his own gruff way, but I bought a 1977 Square yesterday & I don't have room or the finances for 2 big projects. I'm selling Walter along with the 1968 specific parts for him. He is a 1968 C10 SWB Fleetside 2wd 507 blue jewel. He still has all his original pieces/parts including the 327/3OTT. I never attempted to get him running, but the motor does turn over with a pull bar on the crank bolt and the trans/clutch still engage and goes through the gears. My intentions were either an LSX swap or a BBC/700r4 swap. I have a build thread that has plenty of pictures of him, and if you need more, please let me know and I'll snap them. He now lives in my climate controlled shop, but he's not been subjected to the elements since at least 1984 (the tag that was on it when I rescued him out of Granddads basement garage). He's got a wonk on the drivers side fender on the leading edge by the headlight, a little rust in the rockers and the front bed panel. He's still wearing his original paint/patina and is still a one owner ride. I have the original bill of sale, protecto plate, owners manual and the bill of sale from the original owner when I bought it 4 years ago. New parts that need to go with him... Blue high hump ACC carpet kit and "No hole" high hump Stainless Steel door sill plates Aftermarket Blue dash pad (not a cover) Billet aluminum hood hinges Painless Wiring 10206 harness Fesler billet 2 piece taillights, and front and rear marker lights Precision weatherstripping for entire cab & doors Dakota Digital guages And a tilt column that Les (70ShortFleet) completely rebuilt and painted 507 blue for me. It's still in his kicka$$ wooden crate he shipped it in & was only opened to ogle. I also have quite a few small assundry used parts that will be included... i.e. extra set of door handles, extra trim pieces here and there etc. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=636095 New and final price, $10,000 Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha Last edited by nlped; 08-12-2018 at 06:55 PM. Reason: New price

07-31-2018, 09:13 PM	#2
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne I’ve had a few requests for pics, so I’ll get a bunch taken & posted Friday. I’ll also go through the “assundry” parts and make a more thorough list. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-03-2018, 02:50 PM	#3
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne Here's a few pics of a few of the included parts... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-03-2018, 02:51 PM	#4
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne Some more... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-03-2018, 02:55 PM	#5
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne Couple more... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-03-2018, 03:06 PM	#6
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne I tried to get a picture of the carpet, but the color washed out pretty bad in the pic. It is the correct light blue for Walt and is for a high hump too. Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-12-2018, 06:55 PM	#7
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne New and lowest price $10,000. Just the truck...$7500. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-14-2018, 01:46 PM	#8
demoj21 Registered User Join Date: Mar 2013 Location: Albion IL. Posts: 10	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne This truck is awesome. Good luck with the sale.

08-14-2018, 05:11 PM	#9
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,924	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne Ed , interested in just the truck

08-14-2018, 06:57 PM	#10
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,924	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne On sent

08-14-2018, 07:45 PM	#11
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne I pm’ed you guys back. I’d also trade for a Roundeye square 3/4 ton crewcab (or ccsb) or a second gen camaro or trans am. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-16-2018, 10:27 PM	#12
67shortstepside Registered User Join Date: Jul 2014 Location: Alabama Posts: 112	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne would you sell the cigarette light and knobs ?

08-19-2018, 05:53 PM	#14
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne Except for the 2 guys out there that I gave a last chance... Yeah, I bought more parts for Walter today while I was over in Atlanta. I’m thinking he’s staying here.... __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-20-2018, 11:01 AM	#15
Concordca Junior Member Join Date: Jan 2017 Location: Concord CA Posts: 68	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne Are you willing to sell the parts separately? I would be interested almost all of if other than the dash pad and carpet. If so what wold shipping be to 94517? Thanks, Josh

08-24-2018, 10:49 PM	#17
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 1968 2wd SWB Fleetside C10... Walter DeWayne Keepin’ Him! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.