|
Worked on the battery tray as the day of putting the front end back on grows closer and closer. I cut of a couple of portions, including the AC brackets, the lipped portion on the side, and the extra metal around the top that wasn’t needed. I then added a piece of angled metal to the upper portion in order to mount it to a factory bolt on the upper driver side. Then just drilled the side holes into the bracket and into the core support. Came out better than expected, and also didn’t have to relocate the horn.
Front end goes on tomorrow, then it’s plumb the cooling system and mount the overflow tank. Driving is near!!!
Posted via Mobile Device
|
09-19-2018, 09:11 PM
Hybrid Mode
