The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading > 4x4 Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-22-2012, 12:37 PM   #201
lolo33
Registered User
 
lolo33's Avatar
 
Join Date: Jun 2012
Location: Givors - FRANCE
Posts: 109
Re: Curt's '72 K20 Resto-mod

what a restoration job !
very interesting.
What interested me first is the audio system with 6 speakers and bass system under the seats.
I've installed an audio vintage, and re-used 2 speakers Jensen under seats. But it's very noisy in the cab' because I've just glasspacks as muflers, and they are under the cab' ==> so the sound is not really good. Now I would like to put 2 speakers in cabin, but I don't know what is the best place for : buy kick panels ? other place ?
thanks for helping me on this point.
Laurent
__________________
'70 C10 shortbed - 350 Edelbrock equipped - 4/1 headers - 3" flowmaster exausts
'07 MUSTANG V8 convertible - CAI Spectre - Brembo's - 3" flowmaster exhausts
lolo33 is offline   Reply With Quote
Old 05-23-2017, 01:35 PM   #202
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

We're back!
The truck has been done for awhile. It's about the trip, not the destination. I truly enjoyed the restoration process. After a short time, I got kinda bored, as the truck was 'done' for the most part.
Enter 2016 and after an uneventful 2015, I decided to pull the transmission and transfer case. When the truck was in California, the previous owner stepped up and had a 700R4 and 208 transfer case installed.
I never liked the way it shifted and I was constantly draining fluid from the transfer case which seeped from the transmission.
New converter, internals and gaskets were next up.
Back to wrenching!
Attached Images
   
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 05-24-2017, 09:56 AM   #203
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Transfer case re-sealed and detailed.
Eastwood products are good quality.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 05-25-2017, 11:32 AM   #204
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

I know most have had to move on from 16.5 wheels. I had managed to collect a couple of sets of both 8.25" and 9.75" wide.
I've always liked the white steelie look. Ran the 8.25's with 31x10.50's for several years, never thinking much about it. When all the 33x12.50's dried up, I was considering the move to 16" wheels. Also, the fact that if anything happened to what I was running, I had no replacement.
Late last year, I located a set of gently used BFG's in 33x12.50-16.50. Well, they're home and mounted.
Attached Images
  
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 05-25-2017, 09:06 PM   #205
yj4000
Registered User
 
yj4000's Avatar
 
Join Date: Feb 2014
Location: Pulaski, ny
Posts: 116
Re: Curt's '72 K20 Resto-mod

I've always liked the white steel look also. Very nice job.

Ryan.
yj4000 is offline   Reply With Quote
Old 06-09-2017, 09:22 AM   #206
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Here it is with the new wheels and tires installed.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 06-09-2017, 09:34 PM   #207
yj4000
Registered User
 
yj4000's Avatar
 
Join Date: Feb 2014
Location: Pulaski, ny
Posts: 116
Re: Curt's '72 K20 Resto-mod

WOW! I really like your truck. Those wheels look great with the yellow and white.

Ryan.
yj4000 is offline   Reply With Quote
Old 06-11-2019, 10:36 AM   #208
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

I wanted to show the installation of the 3 point shoulder belts I purchased from Tom on for sale postings. The safety upgrade was well worth it. The installation was easy.

After much deliberation, I went with white over ivory. I felt originally that ivory would be a tick too dark. After seeing them, I feel ivory would have worked as well.

I painted the buckles and retractor housings and B pillar covers using SEM super white 10503. I would suggest using the sand free primer first, as the rough finish won't allow any sanding. Time will tell if they need redone.

You can't use the oem style bolts on the belts. The holes in the mounting brackets are too small for the shoulder of the existing bolts. New hardware is included. I opted for a 1/4" longer bolt for the belts than what was provided.

The B pillar bolts were provided as well. I highly recommend running a tap through the holes before attempting the installation. 7/16-20 is the size. I found that the cover wouldn't fit well when I tightened the pillar bolts firmly. I backed them off just a bit.

It's obvious you're wearing a restraint now, rather than just a lap belt. I'm also hoping a couple of dollars in insurance savings because of this safety upgrade.

As you can see, they're tasteful and functional. I had considered this for some time, but hadn't found a set that looked stock enough and didn't require potential fabrication for installation.
Attached Images
     
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 06-11-2019, 01:40 PM   #209
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 7,024
Re: Curt's '72 K20 Resto-mod

Nice job Curt
I like the look of the whole truck.
Those seatbelts look fantastic.
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)

http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is online now   Reply With Quote
Old 06-11-2019, 02:48 PM   #210
underliner6
Registered User
 
underliner6's Avatar
 
Join Date: Oct 2013
Location: Montrose, CO
Posts: 328
Re: Curt's '72 K20 Resto-mod

Just read through your whole thread, just awesome. The 33’s and 2.5” lift looks great. I really think that is the best look for these trucks.
__________________
Jim

1972 K20 Cheyenne- 350/350/205
1972 K20 Cheyenne - 350/SM465/205
underliner6 is offline   Reply With Quote
Old 06-12-2019, 08:37 AM   #211
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Quote:
Originally Posted by Getter-Done View Post
Nice job Curt
I like the look of the whole truck.
Those seatbelts look fantastic.
Quote:
Originally Posted by underliner6 View Post
Just read through your whole thread, just awesome. The 33s and 2.5 lift looks great. I really think that is the best look for these trucks.
Thanks for the kind words, guys.

I was going for a look that a project manager would drive to job sites with a 'day two' twist from the dealership. I just wanted a stock heavy duty look.
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 06-24-2019, 09:55 AM   #212
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Spent last Saturday evening working on leaking valve covers.
Since the truck isn't a daily driver, the valve cover gaskets have decided to weep slightly causing minor smoking from the manifolds. Easy fix.

The covers are factory LT1 pieces which are aluminum. This would also allow time to use a little polish on them as well.

I leaned toward the Fel-Pro 1628 steel core set. A little pricy, but reviews were very good. They are thicker than the ones I had originally installed a few years back.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 06-25-2019, 08:37 AM   #213
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Re-assembly when smooth. But hey, a basic small block in a cavernous engine bay. Valve covers cleaned up nice.
If you use these gaskets, keep in mind they are thicker. I recommend slightly longer bolts for the valve covers. I chose stainless steel at 1.25" long with a stainless washer.
A short drive and no leaks. We'll keep an eye on things.
And, we got our number for the Street Rod Nationals in Louisville. Looking forward to the drive.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 03-18-2023, 04:00 PM   #214
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Been quite a while.
I still follow this site, but not as I should. Regardless, I still have the truck, and it still gets love.
Right now, preparing to install a new laminate to the glove box door.
As you purists know, the aluminum applique was painted. Well, find a new one.
Starting the process.
Cleaned the aluminum and sprayed with WD-40 to remove anything left.
Razor blade to remove everything else.
More to come as I work with the stuff.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 03-19-2023, 02:14 PM   #215
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Aluminum applique has been cleaned of solvents and taped up with frog tape. I like the blue 3M just as well, though.
I'm going to paint the area with brown Rust-Oleum to help fill any scratches in the aluminum. And, to help hide any edge issues when installing the laminate.
I did this same process when restoring the wood bezels on my door panels.
I'll do this later this week, as it's below freezing outside today.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 03-21-2023, 01:41 PM   #216
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Before I painted, I realized I needed to measure where the Cheyenne Super emblem has to be located.
Approximately 1 inch from the center of the emblem to the lower right side of the appilque.
7/8" from the bottom.
Each measurement from the inside edge of the bead of the applique.
I nipped the posts off the back of the emblem. I'll be using adhesive to mount it.
Attached Images
  
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 03-22-2023, 12:57 PM   #217
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Paint is done.
This was only to fill scratches, and to cover to the edge the bead of the applique.
I'll spray the back of the laminate with adhesive and apply it next.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 03-24-2023, 02:46 PM   #218
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

I used Elmer's Spray adhesive on the painted applique.
I pre trimmed it large. I used a flexible bondo scraper to work out bubbles and bring it to the edge.
The tough part was around the lock. There's a pretty significant dish there.
I pierced from the backside of the door, and cut an 'x' the slowly worked the laminate into the dish.
I installed the lock and then trimmed around it removing any extra material.
I then used a large socket to press it in place and a clamp to hold it overnight.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 03-25-2023, 02:44 PM   #219
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Almost done.
A little more adhesive to the top of the area where the lock is and tape to hold it.
Not getting any feedback. I know that others have done this. Perhaps this should have been in a different area of the website to assist others.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 03-25-2023, 03:05 PM   #220
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 7,024
Re: Curt's '72 K20 Resto-mod

Good idea with the socket and clamp.

I am following along with your progress.

It can probably be found in a search.

Great job looking good.
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)

http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is online now   Reply With Quote
Old 03-25-2023, 03:12 PM   #221
Orange71shorty
Senior Member
 
Join Date: Feb 2009
Location: Helena, Montana
Posts: 486
Re: Curt's '72 K20 Resto-mod

Super nice truck
Orange71shorty is offline   Reply With Quote
Old 04-01-2023, 12:57 PM   #222
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Thanks for the responses!
Wrapping this project up.
I used 3M weatherstrip adhesive to the back of the Super emblem. I used black. Although I do use the snot color adhesive for certain repairs.
Placed in the original location based on the dimensions I took earlier.
A 2 pound block to hold it in place.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 04-03-2023, 02:01 PM   #223
Curt's_72
Registered User
 
Curt's_72's Avatar
 
Join Date: Oct 2006
Location: Peru, Indiana
Posts: 203
Re: Curt's '72 K20 Resto-mod

Woo Hoo! done.

Installed. The aluminum applique is key. Don't put wood laminate on a glovebox and think you're gonna pull it off.
There's a Super glovebox cover for sale in the classified section now for cheap! Find another one.
Attached Images
 
__________________
Click below to see my build thread...lot's of stuff there

http://67-72chevytrucks.com/vboard/s...d.php?t=494493
Curt's_72 is offline   Reply With Quote
Old 04-03-2023, 04:48 PM   #224
GSP7
Registered User
 
GSP7's Avatar
 
Join Date: Sep 2012
Location: Idaho
Posts: 610
Re: Curt's '72 K20 Resto-mod

My '69 CST truck had a factory chrome glove box, with the wood grain insert

Ash tray was chrome too

.
__________________
'81 K20 Silverado , '99 Dodge Cummins 4x4, '05 Dodge Cummins 4x4,

Pinstriping-Lettering-Specialty Painting

Last edited by GSP7; 04-03-2023 at 05:07 PM.
GSP7 is offline   Reply With Quote
Old 04-03-2023, 09:25 PM   #225
Orange71shorty
Senior Member
 
Join Date: Feb 2009
Location: Helena, Montana
Posts: 486
Re: Curt's '72 K20 Resto-mod

Quote:
Originally Posted by GSP7 View Post
My '69 CST truck had a factory chrome glove box, with the wood grain insert

Ash tray was chrome too

.
If they were chrome then someone other than the factory did it
Orange71shorty is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:16 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com