1967 Chevy 327 Alternator Setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Steeveedee** · 04-16-2024, 10:02 PM

There are sure to be videos online about clocking your alternator. It merely involves removing the 4 screws attaching the two halves together, pulling them slightly apart to allow rotation, and putting the screws back in one the rotation is complete. Careful, because if you go to far apart you'll have to deal with reinstalling the brushes in the holder.

Chaparralman1974 · 04-17-2024, 07:44 AM

Quote:

Originally Posted by Steeveedee

There are sure to be videos online about clocking your alternator. It merely involves removing the 4 screws attaching the two halves together, pulling them slightly apart to allow rotation, and putting the screws back in one the rotation is complete. Careful, because if you go to far apart you'll have to deal with reinstalling the brushes in the holder.

I was able to reclock it. It gave me a little more room, but it still hits the valve cover. I will post up some pictures later.

Clay

04-16-2024, 10:02 PM	#1
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,131	Re: 1967 Chevy 327 Alternator Setup There are sure to be videos online about clocking your alternator. It merely involves removing the 4 screws attaching the two halves together, pulling them slightly apart to allow rotation, and putting the screws back in one the rotation is complete. Careful, because if you go to far apart you'll have to deal with reinstalling the brushes in the holder. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.