The 60-66 "PAYING IT FORWARD" thread! - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MASTERBrian · 11-09-2017, 01:23 AM

Quote:

Originally Posted by mrjata

Anyone want the original Eaton rear from my '60? NW Missouri

Is it posi by chance? I have a 393 in my 60 burb and it is posi, but I'm missing some of the clutch retainers. If so I'd be interested in the guts if you didn't mind pulling.I'd like the entire thing, but not sure I want to I make the drive and I'm currently sitting on a 62 rear diff that isn't posi, just in case I have issues with mine. I'd consider paying for your time to pull.

mrjata · 11-09-2017, 10:59 AM

Quote:

Originally Posted by MASTERBrian

Is it posi by chance? I have a 393 in my 60 burb and it is posi, but I'm missing some of the clutch retainers. If so I'd be interested in the guts if you didn't mind pulling.I'd like the entire thing, but not sure I want to I make the drive and I'm currently sitting on a 62 rear diff that isn't posi, just in case I have issues with mine. I'd consider paying for your time to pull.

I rather doubt that it is a posi. I don't see any clutches at first glance. I haven't had time to get both wheels up to check.

MASTERBrian · 11-09-2017, 02:14 PM

Quote:

Originally Posted by mrjata

I rather doubt that it is a posi. I don't see any clutches at first glance. I haven't had time to get both wheels up to check.

Here's what my posi looks like inside.

I don't think yours is posi after comparing it to my carrier and the non-posi unit I have from a 62.

If I'm seeing something wrong of course let me know. Thanks

mrjata · 11-11-2017, 12:14 AM

Quote:

Originally Posted by MASTERBrian

Here's what my posi looks like inside.

I don't think yours is posi after comparing it to my carrier and the non-posi unit I have from a 62.

If I'm seeing something wrong of course let me know. Thanks

You are on it. No clutches found in there.

66-PMD-GMC · 11-09-2017, 09:23 AM

I'd like the panhard bracket off of it...
Whattaya say...?
I'd gladly pay for the ride..
;-)

**The Rocknrod** · 12-06-2017, 01:42 PM

Fender Welt or Welting for fenders, one roll unopened. You pay shipping from 76633.

Stepside6.5 · 12-06-2017, 02:01 PM

I would be interested 43015

Rick
Posted via Mobile Device

**The Rocknrod** · 12-06-2017, 02:25 PM

Quote:

Originally Posted by The Rocknrod

Fender Welt or Welting for fenders, one roll unopened. You pay shipping from 76633.

Quote:

Originally Posted by Stepside6.5

I would be interested 43015

Rick
Posted via Mobile Device

USPS Flat Rate Box - $13.60
Fedex Ground 3 day - $13.80

Stepside6.5 · 01-04-2018, 12:07 AM

MasterChief I will take them if you still have them. Sorry for the delay never seen your response til now. I will send PayPal if that works and you still have the roll.

Rick
USMC

**The Rocknrod** · 01-04-2018, 10:07 AM

Quote:

Originally Posted by Stepside6.5

MasterChief I will take them if you still have them. Sorry for the delay never seen your response til now. I will send PayPal if that works and you still have the roll.
Rick
USMC

Sent you a PM Rick.

kennyw · 12-06-2017, 03:48 PM

I have a 6 cylinder engine one hour north east of Seattle, WA. Pulling it out of a 64 Chevy very soon. Looks like a 250 but not sure since out is not original. Didn't run when i got the truck and I have put no effort into getting it running. Free if you want to help pull it. I don't want to store it. PM me for more info.

Rusty63 · 01-21-2018, 09:33 PM

Have in cab gas tank,with sender,and mounting plates with straps from 63 c-10,no rust and came out in one piece,not sure of sending unit shape,had old fuel in it and haven't pulled the sender out to check,am going with rear sub tank..

Rpederson46 · 01-27-2018, 07:03 PM

I have aset of four 15" three-clip 6 lug wheels off 66 Chevy C10 located Santa Fe NM. Also brake drums and parts that are as old as truck. I suspect that shipping is prohibitive.

demian5 · 02-07-2019, 02:20 PM

Quote:

Originally Posted by Rpederson46

I have aset of four 15" three-clip 6 lug wheels off 66 Chevy C10 located Santa Fe NM. Also brake drums and parts that are as old as truck. I suspect that shipping is prohibitive.

I could sure use those parking brake cables.

Tom bunch · 03-13-2018, 03:37 PM

Quote:

Originally Posted by Rusty63

Have in cab gas tank,with sender,and mounting plates with straps from 63 c-10,no rust and came out in one piece,not sure of sending unit shape,had old fuel in it and haven't pulled the sender out to check,am going with rear sub tank..

Will the tank fit 64 gmc if so how much you asking for it include shipping thanks in advance
Posted via Mobile Device

Bentbolt · 03-25-2018, 10:37 PM

Quote:

Originally Posted by Tom bunch

Will the tank fit 64 gmc if so how much you asking for it include shipping thanks in advance
Posted via Mobile Device

I have a tank and sender I would let go. I bought the truck and drove it home 3.5 hours, it holds gas. Send me a pm and we can work it out

LVPhotos · 01-29-2018, 12:42 PM

Under seat jack mount, spare mount parts.
BTW, who collecting bolts? I came across a can full I pulled.

**slepysal** · 01-30-2018, 12:00 AM

Quote:

Originally Posted by LVPhotos

Under seat jack mount, spare mount parts.
BTW, who collecting bolts? I came across a can full I pulled.

I ll take the jack mount Shipping to Ca 95112 ?

**allchevy58** · 01-29-2018, 11:18 PM

2 Exhaust brackets off a 64' C30. Shipped from 89508.

**slepysal** · 02-02-2018, 01:31 AM

passing on under seat jack mount

Rusty63 · 03-13-2018, 06:31 PM

Hi Tom,sorry i don't have the tank any more,forgot to update the post...Darren

Tom bunch · 03-15-2018, 01:38 AM

No problem thanks for the reply back

msg · 03-18-2018, 04:05 PM

Embarrassed to post what I have after seeing all the great stuff everyone else is offering, but there are some scraps from repairing my 66 that I was going to haul off but if anyone who is making some minor patches could use any of this stuff let me know. Just pay shipping from my zip 30263. The top pic is the repro patch panel scraps and below is the sandblasted original scraps.

**allchevy58** · 03-25-2018, 09:05 PM

Have a floor mat out of my 64 C30, good condition, two rips by e-brake handle, spare tire holder, radiator, was not leaking, installed aluminum radiator and sill plates, not dinged up or rusted. Shipped from zip 89508.

oem4me · 03-26-2018, 12:37 AM

Quote:

Originally Posted by allchevy58

Have a floor mat out of my 64 C30, good condition, two rips by e-brake handle, spare tire holder, radiator, was not leaking, installed aluminum radiator and sill plates, not dinged up or rusted. Shipped from zip 89508.

Interested in both the radiator and the floor mat. If you give me a size and weight, I can send you a prepaid UPS shipping label. Would this work? Thanks, - Bruce

11-09-2017, 09:23 AM	#5
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: The 60-66 "PAYING IT FORWARD" thread! I'd like the panhard bracket off of it... Whattaya say...? I'd gladly pay for the ride.. ;-) __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

12-06-2017, 01:42 PM	#6
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: The 60-66 "PAYING IT FORWARD" thread! Fender Welt or Welting for fenders, one roll unopened. You pay shipping from 76633. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-04-2018, 12:07 AM	#9
Stepside6.5 Registered User Join Date: Jan 2015 Location: Delaware Ohio Posts: 22	Re: The 60-66 "PAYING IT FORWARD" thread! MasterChief I will take them if you still have them. Sorry for the delay never seen your response til now. I will send PayPal if that works and you still have the roll. Rick USMC

12-06-2017, 03:48 PM	#11
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 130	Re: The 60-66 "PAYING IT FORWARD" thread! I have a 6 cylinder engine one hour north east of Seattle, WA. Pulling it out of a 64 Chevy very soon. Looks like a 250 but not sure since out is not original. Didn't run when i got the truck and I have put no effort into getting it running. Free if you want to help pull it. I don't want to store it. PM me for more info. __________________ "I got it one piece at a time and it didn't cost me a dime..."

01-21-2018, 09:33 PM	#12
Rusty63 Registered User Join Date: Sep 2017 Location: Kincardine,Ontario Posts: 80	Re: The 60-66 "PAYING IT FORWARD" thread! Have in cab gas tank,with sender,and mounting plates with straps from 63 c-10,no rust and came out in one piece,not sure of sending unit shape,had old fuel in it and haven't pulled the sender out to check,am going with rear sub tank..

12-06-2017, 02:01 PM	#7
Stepside6.5 Registered User Join Date: Jan 2015 Location: Delaware Ohio Posts: 22	I would be interested 43015 Rick Posted via Mobile Device

01-27-2018, 07:03 PM	#13
Rpederson46 Registered User Join Date: Apr 2017 Location: Santa Fe Nm Posts: 10	Re: The 60-66 "PAYING IT FORWARD" thread! I have aset of four 15" three-clip 6 lug wheels off 66 Chevy C10 located Santa Fe NM. Also brake drums and parts that are as old as truck. I suspect that shipping is prohibitive. Attached Images

01-29-2018, 12:42 PM	#17
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: The 60-66 "PAYING IT FORWARD" thread! Under seat jack mount, spare mount parts. BTW, who collecting bolts? I came across a can full I pulled. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-29-2018, 11:18 PM	#19
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,429	Re: The 60-66 "PAYING IT FORWARD" thread! 2 Exhaust brackets off a 64' C30. Shipped from 89508. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1964 C-30 383/4 speed, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

02-02-2018, 01:31 AM	#20
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: The 60-66 "PAYING IT FORWARD" thread! passing on under seat jack mount __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

03-13-2018, 06:31 PM	#21
Rusty63 Registered User Join Date: Sep 2017 Location: Kincardine,Ontario Posts: 80	Re: The 60-66 "PAYING IT FORWARD" thread! Hi Tom,sorry i don't have the tank any more,forgot to update the post...Darren

03-15-2018, 01:38 AM	#22
Tom bunch Registered User Join Date: Mar 2018 Location: Kentucky Posts: 2	Re: The 60-66 "PAYING IT FORWARD" thread! No problem thanks for the reply back

03-18-2018, 04:05 PM	#23
msg Registered User Join Date: Feb 2013 Location: GA Posts: 1,313	Re: The 60-66 "PAYING IT FORWARD" thread! Embarrassed to post what I have after seeing all the great stuff everyone else is offering, but there are some scraps from repairing my 66 that I was going to haul off but if anyone who is making some minor patches could use any of this stuff let me know. Just pay shipping from my zip 30263. The top pic is the repro patch panel scraps and below is the sandblasted original scraps. Attached Images __________________ Progress thread for my 66 http://67-72chevytrucks.com/vboard/s...d.php?t=623848

03-25-2018, 09:05 PM	#24
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,429	Re: The 60-66 "PAYING IT FORWARD" thread! Have a floor mat out of my 64 C30, good condition, two rips by e-brake handle, spare tire holder, radiator, was not leaking, installed aluminum radiator and sill plates, not dinged up or rusted. Shipped from zip 89508. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1964 C-30 383/4 speed, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.